AMXmachinery
PARTE: 12534 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12534 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONES440V, 3 FASES
AMXmachinery
PART: 12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI
PART:
12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI
USED
- CHECKED AND CLEANEDModel:
MicronMax
oscillation length: 120mm (4.8")Max
slot depth: 80mm (3.2")Max
slot thickness: 30mm (1.2")Hourly
production: 500-800 slotsSpindle
rotation: 9,000 RPMOscillations
per min.: 60-350Max
table inclination: 20 degreesTables
19" x 9"Pneumatic
holddown on each tableSpindle
motor: 3HPOscillation
motor: 1/2HP
Current
Voltage: 220v
AMXmachinery
PARTE: 12533 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12533 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONESModelo MicronMax
oscillation length: 120mm (4.8")Max
slot depth: 80mm (3.2")Max
slot thickness: 30mm (1.2")Hourly
production: 500-800 slotsSpindle
rotation: 9,000 RPMOscillations
per min.: 60-350Max
table inclination: 20 degreesTables
19" x 9"Pneumatic
holddown on each tableSpindle
motor: 3HPOscillation
motor: 1/2HP
Current
Voltage: 220v
AMXmachinery1
PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMP
PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMPQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the botto...
AMXmachinery
PART: 2QM-R-RCGS-E - ROLLER COATER GLUE SPREADERS - 1, 2 SIDES - 24", 48", 63" WIDE
ROLLER COATER GLUE SPREADERS
PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE
SPREADER - 1 SIDE - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-24-1.75-E - GLUE
SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE
SPREADER - 1 SIDE - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE
SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE
SPREADER - 1 SIDE - 63” WIDE - 1.75” OPEN
PART: 2QM-R...
AMXmachinery
PARTE: 2QM-R-RCGS - ENGOMADORAS 1 Y 2 LADOS - ANCHO 24", 48" Y 63"
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO – ANCHO 24” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 1 LADO – ANCHO 48” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 2 LADOS – ANCHO 48” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 1 LADO – ANCHO 63” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 2...
AMXmachinery
PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM
PART:
4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA
New with warrantyDemo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut is 0-60mm
...
AMXmachinery
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
PARTE:
4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut i...
AMXmachinery
PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8”
PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL
PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8”
NEW WITH WARRANTY
Motor 5 HP• Swiss made quality for accuracy and
durability!• Y-axis digital measuring for horizontal cuts
with kerf compensation for top down strip cutting• One-piece fully welded frame, suitable for
free-standing or wall-mount installation• Heavy- duty support rollers with integral
panel stop assembly• Full length heavy-duty center shelf with
move...
AMXmachinery
PARTE: 2ST-COMPACT-PLUS-TALL- 5207 - ESCUADRADORA VERTICAL - COMPACTA - CAP. 181” X 81” X 2-3/8”
PARTE:
2ST-COMPACT-PLUS-TALL- 5207 - ESCUADRADORA VERTICAL - COMPACTA - CAP. 181” X 81” X 2-3/8”NUEVA CON GARANTIA
Motor 5 HP• Swiss made quality for accuracy and
durability!• Y-axis digital measuring for horizontal cuts
with kerf compensation for top down strip cutting• One-piece fully welded frame, suitable for
free-standing or wall-mount installation• Heavy- duty support rollers with integral
panel stop assembly• Full length heavy-duty center shelf with
moveable alumi...
AMXmachinery
PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER - KUPER
PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER
- KUPER
USADA - BUENAS CONDICIONESModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachinery
PART: 12532-E - CROSS FEED SPLICER - KUPER
PART: 12532-E - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachinery1
PART: 12531-E - BAND SAWMILL - BAKER 3674D
PART: 12531-E - BAND SAWMILL - BAKER 3674D
USED - VERY GOOD CONDITIONModel: 3674DMfg. 2022551 hours - 09/18/23Currently used 2-3 days a weekOne ownerPortable
Log deck
AMXmachinery1
PARTE: 12531 - ASERRADERO ESTACIONARIO - BAKER - 3674D
PARTE:
12531 - ASERRADERO ESTACIONARIO - BAKER - 3674D
USADO - MUY BIENAS
CONDICIONESModelo: 3674DMfg. 2022551 horas de uso - 09/18/23Se usa 2 a 3 dias a la semanaUnico duenoPortable
Log deck
AMXmachinery1
PART: 2CK-HR400PB-E - HORIZONTAL BAND RESAW - 1 BAND - WITH RETURN CONVEYOR - 30 HP – 15-3/4” WIDE
PART: 2CK-HR400PB-E - HORIZONTAL BAND RESAW - 1
BAND - WITH RETURN CONVEYOR - 30 HP – 15-3/4” WIDE
NEW WITH WARRANTYCapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise t...
AMXmachinery1
PARTE: 2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
PARTE:
2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
NUEVA CON GARANTIACapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise thic...
AMXmachinery1
PART: 2CK-HR11P-E - HORIZONTAL BAND RESAW - 1 BAND - 20 HP - 11.8” WIDE
PART: 2CK-HR11P-E - HORIZONTAL BAND RESAW - 1 BAND
- 20 HP - 11.8” WIDE
NEW WITH WARRANTYCan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade height adjustment. The HR11...
AMXmachinery1
PARTE: 2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESOR
NUEVA CON GARANTIACan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade he...
AMXmachinery1
PART: 2CK-HR300PBX-E - HORIZONTAL BAND RESAW - 1 BAND - WITH RETURN CONVEYOR - 0°- 45° 30 HP – 12” WIDE
PART: 2CK-HR300PBX-E - HORIZONTAL BAND RESAW - 1
BAND - WITH RETURN CONVEYOR - 0°- 45° - 30 HP
– 12” WIDE
NEW WITH WARRANTYIs industrially built for demanding applications. The bed can be tilting from 0-45o making it ideal for bevel siding, moulding blanks, or millwork components. Capable of feeding up to 12” x 12” timber and cutting up to 10” thick. The powerful 30HP saw motor has a variable feed control allowing you to match the cutting speed to your blade & appli...
AMXmachinery1
PARTE: 2CK-HR300PBX - REASERRADORA HORIZONTAL - 1 BANDA – CON REGRESADORA - 0°- 45° 30 HP – 12” ANCHO
PARTE:
2CK-HR300PBX - REASERRADORA HORIZONTAL - 1 BANDA – CON REGRESADORA - 0°- 45°
30 HP
– 12” ANCHO
NUEVA CON GARANTIAIs industrially built for demanding applications. The bed can be tilting from 0-45o making it ideal for bevel siding, moulding blanks, or millwork components. Capable of feeding up to 12” x 12” timber and cutting up to 10” thick. The powerful 30HP saw motor has a variable feed control allowing you to match the cutting speed to your blade & applicat...