PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides.  The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching.  With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...

PARTE: 2CK-DWM-36 - ARMADORA DE CAJONESQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the bottom ...

PARTE: 2CK-JDT75 - ENLAZADORA/COLA DE MILANOThis fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.High-quality finish in both plywood and solid wood drawer box materialFast operation with up to 40 drawer boxes produced in an hourSolid cast iron machine structure for vibration-free dovetailing leading to a long machine lifeSuperior finish with two flute dovetail bitFEA...

PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...

PARTE: 2CK-BM-301FEATURES:Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.Come with adjustable two spindle drill head.Pneumatic work clamp to firmly hold workpieces.Machine operation activated by shrouded foot pedal.Cast iron work table with miter gauge for angled holes.Screw rise and fall adjustment of work table for varying timber thicknesses.Enclosed sheet steel floor stand supporting the machine. Table size 400 x 2...

PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  The HS21T has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle is equipped with a quick-change chuck t...

PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The precision boring head has interlocking steel ...

PARTE: 2AC-TLM-162-10 - COLECTOR DE ASERRIN – DE BOLSAS – USO RUDO NUEVO CON GARANTIA• 162-Bag High-Efficiency• Includes (162) 10’ 16 oz. polyester snap-band bag filters rated for up to 300°F• Total Filter Area: 2,545 ft2• Air-to-Media Ratio @ 15,000 cfm: 5.89:1• Top Door, Clean-Side Filter Access – no confined space required• Solid Welded Main Filter Housing/Heavy Duty 7 and 10 gauge construction• Automatic Venturi-Assisted Pulse-Jet Filter Cleaning System• Dwye...

PARTE: STANDARD-408 – ROUTER CNC – 4 X 8 PIES – MOTOR 8.6 HP (6 KW) – MESA VACIO Nuevo con garantíaMesa 4 X 8 pies y 5 X 10 piesOptional: Rotary axis / lathe Inspection services: Machine Gantry X Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Y Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Z Axis ball screw Parallel vertical accuracy 0.001” (0.03mm)Machine Re-position accuracy 0.001” (0.02mm)Machine working accuracy 0.002” (0.05mm)Grating ru...

PARTE: 2CK-MX550AUIs a versatile portable edgebanding solution for the hobbyist or industrial user.  It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory.  The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF).   The full kit includes the portable edgebander, power trimmer, workpiece ...

PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensures a perfectly square...

PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  User friendly controls and adjustments allow for efficient changeovers of edge tape th...

PARTE: 2CK-MX340Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick ch...

PARTE: 2CK-MX370MIs designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual function end trim and corner rounding unitVersatile edgebander capab...

PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...

PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability.  With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...

PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes.  With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease.  Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation.  The machine is constructed with a solid welded steel frame and cast-iron tilting table.  The large solid table is fitted with a s...

PARTE: 2CK-DT-1128A Range of cutter diameter 1” to 6” (changeable) Table diameter 18” Table speed 1.5 ~ 4.0 RPM (4 speeds) Spindle diameter 30 mm Spindle speed 9000 RPM Cutter size 100 mm Spindle height 4” Follower roller diameter 100 mm x 1 Table drive moto...

PARTE: 2CK-SS512TBIs a ruggedly built shaper with refined features well suited for demanding production environments.  Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more.  The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles.  The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality....

PARTE: 2CK-SS512CSB Is a ruggedly built sliding table shaper with refined features well suited for demanding production environments.  Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more.  The sliding table is cast iron and runs on bearings for smooth and vibration free movement. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles.  The heavy-duty cast-iron ...