PART: 2SC-2910-E - FEED TRACK ASSEMBLY - GANG RIP SAW - SCMI - M3 Guides included New with warranty

PARTE: 2SC-2910 - CADENA DE ALIMENTACION - SIERRA MULTIPLE SCMI - M3 Guías incluidas Nueva con Garantia

PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS: Diameter Range: 1/4" ~ 3/4"Motor: 1 HP, 1 PH, 115VWorking Speed: 24 ~ 28 FPMMinimum Working Mate...

PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...

PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...

PART: 2CA-RM70-E - ROUND POLE MILLING MACHINE - CAPACITY 3/8” - 2-3/8” DIAMETER NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, ...

PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260 USED - VERY GOOD CONDITIONSYear of Manufacture: 2018Condition: ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working dimensions:Cross section min./max 0.48"- 10.23" width; .25" - 3.15" thickness. Min. part length 5.5" cut. Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw: Bla...

PART: 12473-E - KITCHEN CABINET - COUNTERTOP MANUFACTURING LINE - EVANSUSED - GOOD CONDITION - AS ISINDEX TABLE - 7,500 USDPINCH ROLLER - 7,500 USDPOSTFORMER $ 12,500 USDCOVING BACKSPLASH - $ 7,900 USDPOSTFORMER 0110 - $ 18,500 USD

PART: 10385-E – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005

PART: 2CK- RAPIDEDGE-PRO-E – AUTOMATIC EDGEBANDER NEW WITH WARRANTYFrom cabinet parts to cabinet doors, this Edgebander can do it all.Are you tired of spending valuable production time adjusting your edgebander to run various edge banding material? Do you want a professional-grade edge banding machine that can work quickly and efficiently? Look no further than the new Cantek RapidEdge Pro Automatic Edgebander!Our top-of-the-line solution is designed to make edge banding a breeze. Wi...

PART: 2CK-MX370PW-E – AUTOMATIC EDGEBANDER NEW WITH WARRANTYFrom cabinet parts to cabinet doors, this edgebander can do it all.The MX370PW Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thickness...

PART: 2CK-MX370P-E – AUTOMATIC EDGEBANDER NEW WITH WARRANTYFrom cabinet parts to cabinet doors, this Edgebander can do it all.The Cantek MX370P Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thi...

PART: 2CK-MX340-E – AUTOMATIC EDGEBANDER NEW WITH WARRANTYHigh-quality edge banding results for cabinet parts and case goods.The MX340 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high-frequency motors on both the end trim and top & bottom trim.  In addition, it is equipped with PVC radius scraping and buffing units.  Its compact design and affordable price point make it the ideal edg...

PART: 2CK-MX340M-E – AUTOMATIC EDGEBANDERNEW WITH WARRANTYCompact design with best-in-class edgebanding result.The MX340M Automatic Edgebander is an entry-level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX340M can output high-quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficie...

PARTE: 2CK-RAPIDEDGE-PRO – ENCHAPADORA DE CANTOS AUTOMATICA NUEVO CON GARANTIAFrom cabinet parts to cabinet doors, this Edgebander can do it all.Are you tired of spending valuable production time adjusting your edgebander to run various edge banding material? Do you want a professional-grade edge banding machine that can work quickly and efficiently? Look no further than the new Cantek RapidEdge Pro Automatic Edgebander!Our top-of-the-line solution is designed to make edge banding a ...

PARTE: 2CK-MX370P – ENCHAPADORA DE CANTOS AUTOMATICA NUEVO CON GARANTIAFrom cabinet parts to cabinet doors, this Edgebander can do it all.The Cantek MX370P Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of ed...

PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...

PARTE: 12484 - TORNO OKUMA - CNC LB-15 USADO BUENAS CONDICIONES

PART: 12524-E – MACHINING CENTER – BIESSE ROVER A SMART 1532 USED – VERY GOOD CONDITION 2019 Rover A Smart 1532 Machine located in Northern, CA. Available for inspection still under power Pictures are from 12-18-2023