ROLLER COATER GLUE SPREADERS PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE SPREADER - 1 SIDE   - 24” WIDE - 1.75” OPEN PART: 2QM-R-RCGS-1-24-1.75-E - GLUE SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN   PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 1 SIDE   - 48” WIDE - 1.75” OPEN PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN   PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 1 SIDE   - 63” WIDE - 1.75” OPEN PART: 2QM-R...

PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO   – ANCHO 24” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 1 LADO   – ANCHO 48” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 2 LADOS – ANCHO 48” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 1 LADO   – ANCHO 63” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 2...

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA New with warrantyDemo model with about 30 hours on it Specifications - Comes with digital readouts on the vertical and horizontal axis, readout in decimal inches or mm - Processing sheets both horizontally and vertically - Cutting height is 2100mm - Cutting length is 4100mm (161") Actual overall length of machine is 16’.4” - Weight 2400 lbs - Thickness of cut is 0-60mm ...

PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM Nueva con garantía Demo model with about 30 hours on it Specifications - Comes with digital readouts on the vertical and horizontal axis, readout in decimal inches or mm - Processing sheets both horizontally and vertically - Cutting height is 2100mm - Cutting length is 4100mm (161") Actual overall length of machine is 16’.4” - Weight 2400 lbs - Thickness of cut i...

PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8” NEW WITH WARRANTY Motor 5 HP• Swiss made quality for accuracy and durability!• Y-axis digital measuring for horizontal cuts with kerf compensation for top down strip cutting• One-piece fully welded frame, suitable for free-standing or wall-mount installation• Heavy- duty support rollers with integral panel stop assembly• Full length heavy-duty center shelf with move...

PARTE: 2ST-COMPACT-PLUS-TALL- 5207 - ESCUADRADORA VERTICAL - COMPACTA - CAP. 181” X 81” X 2-3/8”NUEVA CON GARANTIA Motor 5 HP• Swiss made quality for accuracy and durability!• Y-axis digital measuring for horizontal cuts with kerf compensation for top down strip cutting• One-piece fully welded frame, suitable for free-standing or wall-mount installation• Heavy- duty support rollers with integral panel stop assembly• Full length heavy-duty center shelf with moveable alumi...

PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER - KUPER USADA - BUENAS CONDICIONESModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PART: 12532-E - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PARTE: 12530-E - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PARTE: 12530 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 4000 MM - EMME ELLE Usada - Muy buenas condiciones Modelo: T.O.2.4000 2 cuchillas, doble corte Largo máximo de trabajo 4000mm Hidráulica Panel de control frontal EC9001 Año 2002 Normas CE

PART: 12529-E - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PARTE: 12529 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 3200 MM - MONGUZZI Usada - Muy buenas condiciones Modelo TRM-2L 3200Capacidad 3200 MM Hidráulica Año 1995 Cuchillas afiladas Tapetes nuevos

PART: 12528-E - VERTICAL PANEL SAW - ELCON D215USED - GOOD CONDITION MFG. 2013

PARTE: 12528 - SIERRA VERTICAL - ELCON D215USADA - BUENAS CONDICIONESMFG. 2013

PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A USED - VERY GOOD CONDITIONYear: 2018CAPABILITIES-One-sided edgebander with glue pot-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port-Chain drive and upper presser-Group of pressure rollersWorkstation :-Premilling-Gluing unit with pellet pot-Adjustable pneumatic pressure unit-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, mot...

PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A USADA – MUY BUENAS CONDICIONESYear: 2018CAPABILITIES-One-sided edgebander with glue pot-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port-Chain drive and upper presser-Group of pressure rollersWorkstation :-Premilling-Gluing unit with pellet pot-Adjustable pneumatic pressure unit-End cutting unit 2 tilting saws 0-15˚ for bevel cutting...

PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232 USADO - MUY BUENAS CONDICIONESNumerically controlled machining centre ROVER GOLD 1232 Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis) Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm WORKING TABLE                 6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                 6 back stops of 115 mm stroke and 26 mm height spacers         �...

PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232 USADO - MUY BUENAS CONDICIONESNumerically controlled machining centre ROVER GOLD 1232 Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis) Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm WORKING TABLE                 6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                 6 back stops of 115 mm stroke and 26 mm height spacers         ...

PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm (129.1") Y - Axis: 1320mm (52") Z - Axis: 170mm (7") (6) ATS Panel Support Rails Biesse's ATS (auto locating pods) Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle (HSKF63) 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system (10) Vert. Spindles (7 in X & 3 in Y) (3) Horz...

PARTE: 12525 - CENTRO DE TRABAJO CNC - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm (129.1") Y - Axis: 1320mm (52") Z - Axis: 170mm (7") (6) ATS Panel Support Rails Biesse's ATS (auto locating pods) Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle (HSKF63) 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system (10) Vert. Spindles (7 in X & 3 in Y) (3) Hor...