PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS USED - GOOD CONDITIONCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed sidesWorks with Contact Adhesive or PVA's white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI Foot Print: 74" x 28"

PART: 12539 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HPUSED - GOOD CONDITIONModel 3CAXS3036BV(3) Rotors 36" wide30" x 36" top feed openingBaldor Reliance 40 HP , 3/60/ 230-460 volt, 1775 RPM motor Bottom discharge approx. 28" x 28”

PART: 2QW-F15 - MANUAL EDGE SANDER -  PNEUMATIC - 8” HEAD Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.This product is hand tool only please remember to get the right grit 8" flap wheels for your job.

PART: 2WG-ARTEA1030 - EDGEBANDER - HOLZ-HER - ARTEA 1030ARTEA serieshighest user-optimization, productivity, precision and safety for years thanks to heavy and rigid frame.Control technique and operationwith rotating control panel, dustproof.Easiest operation through the 15,6" touch screen with graphical supportas well as VISE function and glue type library.Glue application system with Glu Jethighest flexibility on glue application via patented nozzle techniqueEVA and PUR glue can be h...

PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOPSIDE ROLLER TABLES Use with saws, planers, edgebanders, jointers, etc.New with warranty120 cm (47”) length x 39 cm (15.35”) widthVariable height 83 - 87 cm (32.5 - 34.25”)Support large and heavy wood pieces and wood panelsAdjustable heigh to pair with your current machines7 galvanized steel ball bearing rollers- 1 back guide to avoid material to fall- 1 block stop to make same size ...

PART: 1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH  SIDE ROLLER TABLES Use with saws, planers, edgebanders, jointers, etc.120 cm (47”) length x 39 cm (15.35”) widthVariable height 83 - 87 cm (32.5 - 34.25”)Support large and heavy wood pieces and wood panelsAdjustable heigh to pair with your current machines 7 galvanized steel ball bearing rollersOptional: - Custom lengths

PART: 12535-E - DOWEL MILLING MACHINE - HAWKERUSED – GOOD CONDITION – AS IS 2” MAXIMUM DIAMETER

PART: 12536-E - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED USED Roll-Feed Optimizing and Defecting Cut-Off Saw Precise and Safe Feeding via Eleven Solid Feed Rolls Main Saw Motor: 8.7 HP, 480v, 3ph Pneumatic Blade Cycle 237" Infeed Marking Conveyor Station 19' Outfeed Belt Conveyor with Four Pneumatic Sorting Kickers 10.5" Kvara User-Interface w/ Push-Button Keyboard Blade Diameter: 500mm Variable Speed Feed up to 787 FPM Sound/Safety Hood 480v...

ROLLER COATER GLUE SPREADERS PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE SPREADER - 1 SIDE   - 24” WIDE - 1.75” OPEN PART: 2QM-R-RCGS-1-24-1.75-E - GLUE SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN   PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 1 SIDE   - 48” WIDE - 1.75” OPEN PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN   PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 1 SIDE   - 63” WIDE - 1.75” OPEN PART: 2QM-R...

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA New with warrantyDemo model with about 30 hours on it Specifications - Comes with digital readouts on the vertical and horizontal axis, readout in decimal inches or mm - Processing sheets both horizontally and vertically - Cutting height is 2100mm - Cutting length is 4100mm (161") Actual overall length of machine is 16’.4” - Weight 2400 lbs - Thickness of cut is 0-60mm ...

PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8” NEW WITH WARRANTY Motor 5 HP• Swiss made quality for accuracy and durability!• Y-axis digital measuring for horizontal cuts with kerf compensation for top down strip cutting• One-piece fully welded frame, suitable for free-standing or wall-mount installation• Heavy- duty support rollers with integral panel stop assembly• Full length heavy-duty center shelf with move...

PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER - KUPER USADA - BUENAS CONDICIONESModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PART: 12532-E - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PARTE: 12530-E - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PART: 12529-E - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PART: 12528-E - VERTICAL PANEL SAW - ELCON D215USED - GOOD CONDITION MFG. 2013

PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A USED - VERY GOOD CONDITIONYear: 2018CAPABILITIES-One-sided edgebander with glue pot-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port-Chain drive and upper presser-Group of pressure rollersWorkstation :-Premilling-Gluing unit with pellet pot-Adjustable pneumatic pressure unit-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, mot...

PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232 USADO - MUY BUENAS CONDICIONESNumerically controlled machining centre ROVER GOLD 1232 Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis) Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm WORKING TABLE                 6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                 6 back stops of 115 mm stroke and 26 mm height spacers         �...

PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm (129.1") Y - Axis: 1320mm (52") Z - Axis: 170mm (7") (6) ATS Panel Support Rails Biesse's ATS (auto locating pods) Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle (HSKF63) 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system (10) Vert. Spindles (7 in X & 3 in Y) (3) Horz...

PART: 2SC-2910-E - FEED TRACK ASSEMBLY - GANG RIP SAW - SCMI - M3 Guides included New with warranty