ID: 90
Open
Listing ID: #90 has been added to your wishlist.
Description
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100
Hydraulic 4 Corner Cable Lift
Touch Screen Controls
Laser Height Sensor
NEMA 12 Enclosure
460 Volt Fused Disconnect
5 HP Hydraulic Power Pack
Panel Size: up to 5’x10’
Panel Thickness: 3/8” to 1-1/2”
Lift Capacity: 7000 pounds
Electrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hz
Options:
- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)
- Upgrade for remote hand pendant controls / “go” button
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachinery
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INC
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INCUsed – Good condition440V, 3 PhaseApproximate space assembled: 16 x 16 feet3 guns, stacker and exit racks includedVIDEO 1: https://vimeo.com/389375899
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
ENGOMADORA DE 40” - MARCA BLACK BROTHERS
PARTE: 11752 - ENGOMADORA DE 40” - MARCA BLACK
BROTHERS
2 - ENGOMADORA DE 40”. ENGONADORA MARCA BLACK
BROTHERS, ACCIONADA POR 2 RODILLOS DE 44” DE LARGO Y 6 ½” DE DIAMETRO, CON
ELEVADOR OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y
ELECTRICA, CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5
PULGADAS DE GROSOR CON UNA CAPACIDAD DE PROCESO DE 88 PIES POR MINUTO, MOTOR DE
3 HP Y MOTORREDUCTOR DE 1.5 HP.
AMXmachinery
PART: 2RS-TRIO-CR42-E – ELECTRO MAGNETIC SEPARATOR – HEAVY DUTY – TRIO CR42
PART: 2RS-TRIO-CR42-E
– ELECTRO MAGNETIC SEPARATOR – HEAVY DUTY – TRIO CR42
New with warranty
TRIO
Model CR42
Self-Cleaning
Electro Magnetic separator complete as follows
Heavy Duty Steel Frame
42" x 48" air cooled magnet with wound coils and class H insulation
Designed for overhead suspension (4) contact points
5 HP TEFC 1800-RPM Electric Motor
Class I Shaft Mount Gear Reducer
Belt Drive complete with guard, drive belts, sheaves and bushings
Self-Cleaning Belt complete...