Identificador: 78
Abierta
ID de articulo : # 78 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EV-4253 - INDEX TABLE - EVANS 4253
Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.
Semi-automatic Index Table for PVA Panel Laminating
Standard Features:
- Left to Right Feed
- Automatic Board Drop
- Adjustable Board Guides
- Hand Crank Width Adjustment
- Pneumatic Break to Lock Width
- Custom Designed Conveyor Rollers
- Max. Board Size: 62" W X 145" L
- Min. Substrate Size: 9" W X 27" L
- Max Board Thickness: 1.5"
- Min Board Thickness: .375
- In Feed Height: 43"
- Out Feed Height: 40"
- Footprint: 177" L x 87" W
- Electrical: N/A
- Air: 100 PSI
- Shipping Dimensions: 179" L X 90" W X 55" H
- Crated Weight: 2500 LBS
Options:
- Other than standard work height
- Right to Left hand feed
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REDUCTOR DE VELOCIDAD - 1 HP - 30.1
PARTE: AMX-10150 - REDUCTOR DE VELOCIDAD - 1 HP - 30.1
USADO - BUENAS CONDICIONES
MOTOR 1
HP, 208-230/460V, 3.6/3.6 AMP
MAX
OUTPUT TORQUE: 1260 LBS
GEAR
RATIO: 30.1
MAX INPUT
HP 1.5 AT 1750 RPM
TYPE: QC
US ELECTRICAL MOTORS
MEDIDAS: 17” LARGO X 9” FONDO X 9”
ALTO
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...
AMXmachinery
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANI
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY
CHAIN VERY GOOD CONDITION