PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS

PARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS

NUEVA CON GARANTIA

Specifications	BS-1212HR-TN	BS-1616HR-TN
Max. Cutting Capacity	12" x 12"	16" x 16"
Distance between Blade to Conveyor	1/4" ~ 12"
Saw Wheel Diameter	28" x 2
Saw Blade Length (Width)	201" (2")	201" (2" ~ 3")
Saw Blade Speed	6000 FPM
Feed Conveyor Width	12"	16"
Feed Speed (Variable)	0 ~ 90 FPM
Main Motor (Each Head)	20 HP x 2	30 HP x 2
Saw Blade Lift Motor	1/2 HP
Feed Conveyor Motor	3 HP
Dust Hood	4" x 6
N. W.	7200 LBS	8600 LBS

Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
It is equipped with a digital controller for convenient and accurate thickness setting.
The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
Variable feed speed is controlled by a frequency inverter for best cutting requested.
The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
Blade tension is adjusted by means of a hand wheel.
A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
The cast iron saw blade wheel are dynamically balance for smooth running.
Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.

Pago y Devoluciones

Forma de pago: Bank Transfer/Direct Debit, Transferencia y Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

BUJES DE ACERO - PARA SIERRAS MULTIPLES

BUJES DE ACERO - PARA SIERRAS MULTIPLES PARTE DIAM INTERIOR DIAM EXTERIOR LARGO 1TS-001 46 MM 76 MM 30 MM

AMXmachinery

PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS

PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUSSpray Line, Dryer, Pumps and Guns and Infeed Table complete USED - VERY GOOD CONDITIONPassline Height: 900 mm Operating side: RH, as viewed from inlet of line, LH available as a special order. Workpiece Dimensions (Approx.): Min. - max. length: 300 mm - 4880 mm (12" - 16') Min. - max. width: 25 mm - 1300 mm (1" - 51”) Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2") Max. weight: 3# per sq. ft Speeds: Mechanical speed: 1-3 m/min A...

AMXmachinery

CEPILLO 2 CARAS 14", 16", 20", 24"

PARTE # 1N-CP2-016 - CEPILLO 2 CARAS - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP2-020 - CEPILLO 2 CARAS - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP2-024 - CEPILLO 2 CARAS - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP2-029 - CEPILLO 2 CARAS - 29" ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTORES PRINCIPALES (2)5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1...