ID: 2247
Open
Listing ID: #2247 has been added to your wishlist.
Description
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
New with Warranty
This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.
• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.
• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.
• It can use flat board without per-cutting.
• Variable speed feeding for fast and easy adjustment.
• Industrial full power motor for maximum cutting capacity.
• Precision sealed long-life bearing.
• Heavy cast iron frame and table for durability usage.
• Designed for high production performance.
• Number of round rods per pass is determined by the diameter to be cut, maximum cutting width is 4" (100 mm).
• Cutting capacity: Ø2- Ø30 mm in diameter.
• Magnetic switch control.
• Easy adjustment in every way, more convenient than competitors on the market that saves your adjustment time.
| SPECIFICATIONS | |
| Max. Working Width | |
| Range of Rod Diameter | 1/8" - 1-1/8" |
| Motor Top Spindle | 7.5 HP |
| Motor Bottom Spindle | 7.5 HP |
| Feed motor | 1 HP |
| Spindle Speed | 6500 RPM |
| Feed Speed | 15 - 45 FPM |
| Max Cutter Diameter | 4" |
| Spindle Diameter | 1-1/4" or 30 MM |
| Dust Hood | 4" x 2 |
| Machine Size & Weight | 70" x 33" x 49" - 2400 LBS |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
SIERRA DOBLE 45 GRADOS– PISTORIUS - MN-200
PARTE: AMX-10002 - SIERRA DOBLE 45 GRADOS– PISTORIUS - MN-200En buenas condiciones de operacionCaracterísticas:- Sierra para cortar Madera y Metal- 2 motores de 3 HP, 220/44V, 3 fases- 2 sierras de 12 pulgadas instaladas para cortar madera- Capacidad de Corte: 2-5/8" alto x 3-5/16" ancho- Opera con pedal neumático- Velocidad de corte variable- Lista para enviar, se envía sujeta en su tarima de madera y envuelta en plástico- Flete por cobrar a las principales ciudades de Mexico, de $ 2,50...
AMXmachinery
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUSSpray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
A...
AMXmachinery
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USED - VERY GOOD CONDITIONSYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:
Bla...