Identificador: 2149
Abierta
ID de articulo : # 2149 se ha agregado a su lista de deseos.
PARTE: 1AM-1180 – RESACADORA PARA TARIMAS – 40 CUCHILLAS INSERTOS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL
AMXmachinery
Descripción
PARTE: 1AM-1180 – RESACADORA PARA TARIMAS – 40 CUCHILLAS INSERTOS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL
Nueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicas
Motor 10 HP, 220/440V, 3 fases, conectado a 220V
Resaque máximo 9” largo x 3” alto x 3” profundidad
400 a 800 cortes/hr aprox.
Cabezal con 40 cuchillas intercambiables
Cabezal y Cuchillas de Importación – La más Alta Calidad
Construcción Uso Rudo Industrial
Video1 - https://vimeo.com/508634134
Video2 - https://vimeo.com/508634235
Opcional:
Motor 10 HP, 220V, 1 fase
Para mas informacion y especificaciones contactenos
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 2AM-U-200 - ARMADORA DE MARCOS - MANUAL
PARTE:
2AM-U-200 - ARMADORA DE MARCOS - MANUALNUEVA CON GARANTIAThe U-200 is an entry-level frame assembly machine for any small retail operation. As a fully manual machine, it requires no compressed air or electrical power to operate. This unit allows the framer or graphic shop owner to bring the joining operation in-house for cost control and quick customer turn-a-around.The U-200 is compact, quite operation and has a small footprint. Our lightest and most portable joiner, it can be easily mo...
AMXmachinery
FINGER JOINT GRECON TURBO
PARTE # 11770 – SISTEMA FINGER JOINT – GRECON TURBOEn buenas condiciones de operaciónManufactura: 2000Technical designPackage systemHorizontal jointVertical joint Number of milling units: 2Workpiece width max mm: 205Workpiece thickness max mm: 80Infeed length max mm: 1.000Infeed length min mm: 150Package width mm: 600Pressing length mm: 6.100Total pressure kg: 12.000Capacity m/ shift: 16.000Capacity of router cycles/min: 6,5Transfer capacity parts/min: 120Capacity of press cycles/min: 7Loa...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.