Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PARTE: 2PG-DRAGON24 – HORNO PARA CERAMICA, VIDRIO, METALES – 254 LITROS
Nuevo con garantía
Max. Temperatura: 1287 grados centígrados
16500 Watts, 69 Amps
Medidas interiores: 610 mm ancho x 610 mm fondo x 686 mm alto
Potters who struggle with top-loading kilns will enjoy the Dragon. The door swings open 160 degrees on a heavy ¾” steel rod with sealed bearings. Two spring-loaded latches press the door tightly closed.
Quick to load
If you fire ware that is similar in size from one firing to the next, you can leave the shelves and posts stacked in the Dragon between firings. Reach into the kiln to remove the ware and reload the kiln for the next firing.
Since you are loading from the side, you can easily see how close the ware is to the kiln walls and the shelf above. Think of how much time this will save you.
Loading sculptures
Loading a tall sculpture into a top-loading kiln requires skill and care to avoid nudging the piece against the kiln wall. Loading sculpture into a front-loading kiln is faster and easier, because you can see what you are doing. There is far less risk of damaging the piece.
Exceptional element life
The Dragon exudes power. With 16,500 watts, there is ample power to heat the 24” W x 24” D x 27” H interior to cone 10. Having power to spare improves element life, because the elements do not “struggle” to reach high temperatures. The industrial-gauge heating elements are seated and protected in dropped, recessed grooves.
The elements are “tuned,” which means hotter elements are placed in the top and bottom of the firing chamber where more heat is needed. This results in superior heat distribution.
The benefits of extra insulation: save energy and benefit from down firing
Extra insulation saves energy and lengthens cooling. The 4” thick walls, top, and door are made of 3” firebrick backed by 1” of ceramic fiber block insulation. The floor is 4 ½” thick firebrick. The inner door is recessed to help seal in the heat. Because these kilns store heat so efficiently, elements last longer.
The extra insulation not only saves energy but also cools the kiln slowly without having to turn the elements back on. This gives the micro-crystalline structure and color of the glaze sufficient time for full development. Achieve dramatic shifts in glaze color such as iron reds and enjoy the richer look of gas firing with “down firing,” or slow cooling. Create breathtaking pottery in this exciting kiln.
Hinged switch box for easy maintenance
The ventilated switch box is generously slotted for air circulation for the long life of the electrical components. Hinged at the bottom, the switch box opens wide for easy maintenance. Open the box in seconds by merely removing two screws at the top. A folding support arm holds the box in the open position. There is plenty of working space around electrical components. A bank of built-in NEC/UL compliant high-amperage fuses protects the kiln and circuit wiring.
The Dragon will fit through a 34” doorway if the handles and back element cover are temporarily removed.
Dragon features
Saves electricity with extra insulation
Cone 10, 2350°F
3” insulating firebrick and 1” non-organic block insulation in walls, top and door: 4” total thickness
4 ½” thick firebrick bottom
Case temperature at cone 10: 170°F (compared to 400-500°F for standard firebrick kilns)
Two 1” non-tapered peepholes in the left side of the kiln
1” space between switch box and kiln keeps electrical components cooler for long life.
Hinged switch box for easy access
UL/CUL & NEC compliant fuses for safety
Proportional power elements for more even heating
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Designed for production
Warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.
Specifications
Max. Temperature: 2350F = 1287C
Amps: 69
Phase: 1
Watts: 16500
Nema: DIRECT
TUV tested to CSA and UL Standard 499: Y
CE: Y
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type: Sentry Digital 12-key Ceramics
Kiln Type: Front Loading Square
Sides: 4
Chamber Volume: 9.00 CU.FT. = 254.85 litres
Chamber Width: 24.00 IN = 610 mm
Chamber Depth” 24.00 IN = 610 mm
Chamber Height: 27.00 IN = 686 mm
Outer Size
43.80W x 39.30D x 69.00H Inches = 1113W x 998D x 1753H mm
The external kiln height includes a 24" tall stand.
Ship Size
50.00W x 50.00D x 77.50H Inches = 1270W x 1270D x 1969H mm
Ship Weight
905.00 Lbs. = 410.51 Kg.
Ship Method & Notations: This Kiln Ships Via Truck
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Publicar mensaje
PLANTA DE TRIPLAY - 1
PLANTA DE TRIPLAY - 1PARTE: 11750PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8 ABERTURAS MARCA IND. G.H. CON DIMENSIO...
AMXmachinery
PARTE: 12578 – CHAFLANADORA - HAZELDINE
PARTE: 12578 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12496 - ASTILLADOR - 30 HP – VERTICAL – WEIMA WL6
PARTE: 12496 - ASTILLADOR - 30 HP – VERTICAL – WEIMA WL6 Usado - Buenas Condiciones Rotor Motor: 30 HP, 460V, 3PH Rotor Diameter: 260mm Rotor Length: ...
AMXmachinery
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS USADA - MUY BUIENAS CONDICIONESPassline Height: 900 mm Operating side: RH, as viewed from inlet of line, LH...
AMXmachinery