Identificador: 1759
Abierta
ID de articulo : # 1759 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-C431
Is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensures optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.
- Accurate digital thickness control with both Inch & Metric settings allows operator to key in the desired thickness and table will automatically move into position.
- Small footprint
- Combination sanding unit with 5” rubber contact drum and 2.6” wide adjustable sanding platen for a wide range of sanding applications.
KEY FEATURES
- Electronic belt tracking for optimum belt life and sanding results
- Ammeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit.
- Disc brake on main motor allows for faster belt changes
- Pneumatic belt tensioning with quick release outboard support to facilitate fast belt changes.
- Double infeed and outfeed pressure rolls for superior part hold down
- Four table raising jack screws
- Material over-height limit switch
- Hour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine
- Interlocks located on all access doors.
|
|
Inch |
Metric |
|
Abrasive belt size |
44” x 60” |
1117 x 1524 mm |
|
Main motor |
20 HP |
|
|
Feed motor |
2HP |
|
|
Table rise/fall motor |
½ HP |
|
|
Maximum width stock |
43” |
1092 mm |
|
Minimum part length |
16” |
400 mm |
|
Maximum thickness opening |
5.9” |
150 mm |
|
Feed speed: variable |
13 to 52 FPM |
4 to 16 m/min |
|
Passline height |
33”- 38” |
838 – 965 mm |
|
Infeed table |
11 ½” |
292 mm |
|
Dust outlet |
2 @ 4” |
2 @ 100 mm |
|
Compressed air usage |
2 CFM @ 90 PSI |
2 CFM @ 90 PSI |
|
New weight |
3344 lbs |
1520 kgs |
|
Machine dimensions |
70” x 72” x 71 ¼” |
1780 x 1820 x 1810mm |
|
Shipping weight |
3652 lbs |
1660 kgs |
|
Shipping dimensions |
73” x 77” x 82” |
1854 x 1950 x 2080mm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR TUBOAXIAL DIRECTO
PARTE: 1AM - EXTRACTOR TUBOAXIAL DIRECTOPara uso de procesos comerciales e industriales, torres de enfriamiento, extracción de humo, gases en estacionamientos, viveros, etc.Carcaza de acero al carbón, pintada con pintura electrostática y horneada. Aspa de aluminio anti-chispa. Accionado por acoplamiento directo a un motor eléctrico.Características:– Diámetro de aspa desde 16″ hasta 26″.– Motores en voltaje 127/220V. y 220/440V.– Volúmenes de aire: 4,200 hasta 18,725 PCM. Presi�...
AMXmachinery1
SIERRA MULTIPLE - 100 HP
PARTE: 2CK-MRS155FEATURESExtra Robust 100 HP motorGreat Cutting Thickness of 155mm (6.1″)Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumberMRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set upPrecision chain and rails (dip chain) system facilitates accurate cutting operation...
-500x500.png)
AMXmachinery1
TALADRADORA 21 CABEZALES
TALADRADORA 21 CABEZALES PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped with ...
AMXmachinery1
LIJADORA DE BANDA ANCHA CON CEPILLO
PARTE: 2CK-PRNThe spiral insert cutterhead produces a fine finish while requiring less horsepower than traditional straight knives. Additionally, are produced with an extra heavy-duty frame, industrial cast-iron pressure shoes, and cast-iron sanding head assemblies. These features allow to excel in high production environments and in demanding wide belt sanding applications. The PRN series are available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. The first unit ...