ID: 1415
Open
Listing ID: #1415 has been added to your wishlist.
Description
PARTE # MK-JN1601 – ROEDORA
1,6mm (16Ga)
Precisa, cortes curvos y rectos libres de rebaba, todavía aún con poderoso rendimiento.
Cortes lisos y lámina de metal ondulado con la misma matriz.
Rotación de la Matriz a 360 grados, 1/4" de gran carrera.
Extremadamente ligera (pesa solamente 1,6kg).
Calibrador de grosor incorporado para conveniencia.
ESPECIFICACIONES TECNICAS
Potencia: 550W
Capacidad:
Acero sobre 400 N/mm2: 1,6mm
Acero sobre 600 N/nm2: 1,2mm
Acero sobre 800 N/nm2: 0,8mm
Aluminio sobre 200 N/mm2: 2,5mm
Capacidad min. de radio:
Corte exterior: 50mm (2")
Corte interior: 45mm (1-3/4")
Carreras por minuto: 2.200
Longitud total: 261mm (10-1/4")
Peso neto: 1,6kg (3,6lbs)
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
PARTE: 12128
- ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY
BUENAS CONDICIONES - REACONDICIONADA
Width
Capacity: 68"
Grooved,
Rubber-Covered Applicator Rolls
Applicator
Roll Diameters: 7.75"
Main Motor:
1.5 HP, 208-230/460v, 3ph
Hard
Rubber-Covered Doctor Rolls
Top-Elevator
Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical
Digital Readout for Thickness
Currently
460v, 3ph (Ask about Voltage Change)
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – WEEKE
PARTE: 12381 - CNC TALADRO, ENGOMA,
INSERTA – WEEKE
USADA – MUY BUENAS CONDICIONESYear
2013Model
Optimat ABD-050Year
2013460
volt three phase, 60 hz, 10 amps(1)
horizontal CNC controlled X-axis drilling head0.55
kw drill head drive motorSpindle
speed 7500 rpmMax
tool length 70 mm (2.75")(1)
glue injector with dowel insertion headTop
mounted vibrating dowel hopper feederPneumatic
actuation of drill head stroke and dowel insertion head(2)
independent table work zones (can be us...
AMXmachinery
ALIMENTADOR AUTOMATICO – 4 RODILLOS - 1 HP
PARTE: 2EX-XF-44 – ALIMENTADOR AUTOMATICO – 4 RODILLOS - 1
HP
Nuevo con garantía1 HP – 208-240V – 1 FASE1 HP – 208-240V – 3 FASES (OPCIONAL 460V)4 RODILLOS4 VELOCIDADES CAMBIANDO COMBINACION ENGRANESVELOCIDAD 13, 26, 36, 72 PIES POR MINUTOADELANTE Y ATRASRUEDAS 4-3/4″ x 2-1/4″SUSPENSION ¾”
PESO 70 KG