Identificador: 1285 Abierta

ID de articulo : # 1285 se ha agregado a su lista de deseos.

MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG

MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG

USADA – BUENAS CONDICIONES – LIMPIADA Y REVISADA

5-head machine

4-3/4" X 9-1/6" capacity

Spindle configuration: 7.5 HP bottom, 10 HP shared between right and left spindle, 15 HP top, and 10 HP bottom

Spindle diameter: 1-1/2"

Variable speed feed 20 to 40 FPM

72" infeed straightening table

First feed wheel (before bottom spindle) pneumatic up/down

Central adjustment of top spindle chipbreaker and pressure shoe

Central adjustment of left spindle chipbreaker and left guide

DigiSet readouts for left and top spindle

One idle roller in the outfeed table

Motorized feed beam adjustment

Centralized lubrication

Manual waxilit pump

Electronic "Smart" spindle brakes

Set up stand

(5) 120 mm dust outlets

Electrical requirements: 62 amps @ 460 volt

NO tooling included

Mfg 2006

460V, 3 PH, 60 CY

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

ESCOPLO OSCILANTE 2 MESAS

PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERYNueva con garantiaA faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.Two working tables built in both side of the machine to double the production for high efficiency mortising operation.Pneumatic hold down clamps and pneumatic depth movement for smooth finish.Fully automatic mortise produce cycles simply by stepping on the foot pedal.Hydraulic pistons for drillin...

AMXmachinery

PART: 1AM-1150-E – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY

PART: 1AM-1150-E – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depth400 to 800 notcher/hr. approximateCutterhead with HSS knives installed - New designVideo: https://vimeo.com/805816822Machine dimensions: 48” length x 36” width x 40” height - Weight: 662 lb. Shipping...

AMXmachinery

PLANTA DE LUZ 4,500 WATTS

PARTE: 1PWS-4500 - PLANTA DE LUZ 4,500 WATTSMODELOPWS-4500FASESBIFASICAARRANQUEELECTRICOCAPACIDAD MAXIMA4500 WATTSCAPACIDAD NORMAL3600 WATTSVOLTAJE120/240 VOLTSAMPERAJE40 AMPMOTOR7 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE15 LTSFUNCIONAMIENTO AL 50% DE CARGA13 HRSPESO48 KGSCONTIENE KIT DE ARRASTRE

AMXmachinery

PARTE: AMX-10084 – OLLA PARA PINTURA – CAPACIDAD 10 GALONES – BINKS 83-5301

PARTE: AMX-10084 – OLLA PARA PINTURA – CAPACIDAD 10 GALONES – BINKS 83-5301 USADAS – BUENAS CONDICIONES 2 OLLAS EN EXISTENCIA Fabricados en Acero GalvanizadoMedidas tanque: 14” diámetro x 22” alto Medidas totales: 16” diámetro x 28” alto 110 PSI 8 brazos para cerrar tapaEmpaques Nuevos Marca: Binks Modelo: 83-5301

Ver todos