Identificador: 1142
Abierta
ID de articulo : # 1142 se ha agregado a su lista de deseos.
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
SIERRA PANELES SCM
PARTE: 12011 - SIERRA PANELES - SIGMA PRIMA 50 - SCMEN MUY BUENAS CONDICIONESMAS INFORMACION POR RECIBIRSE
AMXmachinery
SLICER - REBANADORA - 8 PIES DE LARGO
PARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGO
8 - SLICER
(REBANADORA) PARA CORTE DE .5 MM HASTA
6MM MARCA IND. G.H. PARA CORTE DE MADRA DE 8 PIES HASTA 18 PULGADAS DE
ANCHO
AMXmachinery
CEPILLOS USO RUDO INDUSTRIAL
PARTE # 1N-CP1-016 - CEPILLO 1 CARA - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP1-020 - CEPILLO 1 CARA - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP1-024 - CEPILLO 1 CARA - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP1-029 - CEPILLO 1 CARA - 29” ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTOR PRINCIPAL5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1 HP1 HP2 H...