CNC DRILL GLUE INSERT DOWEL MACHINE HOMAG WEEKE ABD 100

PART: 12063E – CNC DRILLING AND DOWEL INSERTING MACHINE – HOMAG WEEKE ABD 100

USED – VERY GOOD CONDITIONS

YEAR: 2010

Weeke’s model ABD 100 is designed for small and large capacity horizontal drilling, gluing, and dowel insertion.  The ABD 100 is produced by skilled technicians with a long tradition for excellence in engineering and machine building.

The Model ABD 100 is built on a heavy-duty base with welded steel construction.  The main horizontal beam of the machine holds the carriage for the boring spindle and insertion device, as well as the hopper that feeds the dowel driver.

There are two separate workstations on the machine capable of processing two parts independently (left-hand and right-hand), or one large part.  The machine has one set of CNC controlled processing aggregates with horizontal drilling and dowel driving capabilities.

The processing aggregates are positioned via precision gear rack in the
X-axis.  Height adjustment of the processing aggregates is done manually.

Machine Operating Sequence

The CNC program is selected at the PC control on the machine.  Parts are then manually loaded and positioned against the machine backstops.  Once parts are positioned, there is a work piece clamp, activated by foot pedal, which comes down on top of the piece at each station.  The panel support beams and clamps are PVC coated to protect the work piece.

Once the parts are loaded and clamped, a cycle start button is activated.  The drilling and dowel insertion then takes place.  After this, the mechanical clamp is released, and parts are manually removed from the machine.

Basic Machine

-          Solid steel frame execution

-          Positioning of the axis in X-direction

-          Toothed rack drive in X-direction

-          Digital AC-servo motors

-          Z-adjustment manually

-          Y-adjustment manually

-          Support table with a left and right side stop as well as a rear stop bar

-          Center stop pneumatically lowerable manual control by (selection) switch

-          Four (4) clamping cylinders from above, manually adjustable

-          Automatic central lubrication

CE-Safety and Protection Services

-          Safety fence in the lateral and rear area

Panel Dimensions

Length:            Maximum 1250 mm

                        Minimum 20 mm

Width:              Maximum 800 mm

                        Minimum 50 mm

Thickness:       Maximum 60 mm

                        Minimum 10 mm

Equipment

-          Horizontal drilling aggregate with one (1) spindle

-          One (1) doweling tool (in 32 mm distance from the drilling spindle)

-          Glue injector with adjustable glue amount

-          Glue flow control

-          Standard dowel dimensions: 8 x 30 mm; 8 x 35 mm

-          Vibrating hopper for automatic dowel feeding

Documentation

Documentation in printed form and as CD-ROM including spare parts catalogue and wiring diagram.

Paint

Grey RDS 240 80 05.

Central Dust Extraction

For connection details please refer to the technical data sheet.

Power Control PC85T

Modern control system with bases on Windows PC.

Hardware:

-          PLC control according to international standard IEC 61131

-          Operating system Windows XP (US) embedded

-          PC with minimum 2 GHz and 512 Mbyte RAM

-          17 inch TFT-flat screen

-          1 hard disk with minimum 40 GByte

-          3 ½ inch diskette drive

-          CD-RW drive for reading and writing of CD’s (no dust protection guarantee)

-          USB connection at the operating panel

-          Digital drive technique by fiber optic cable

-          Decentral, digital fieldbus system

-          Ethernet connection 10/100 MBIT RJ45 (without switch)

-          Provision teleservice capability: Comprises the general provision of teleservice capability of the machine including modem and use of teleservice features within the guarantee period.  After the guarantee period a corresponding teleservice contract has to be signed for the use of the teleservice.

-          UPS (Interruption-Free Power Supply): Protects the computer against damages in case of mains interruption, overload and short circuit.  In case of mains interruption the computer is powered down after one minute to avoid loss of data.

Software:

PC85T software package with graphical operations programs:

-          WoodWOP for graphical, dialogue-oriented generation of CNC-programs

-          Graphical tool data base

-          Production list administration

-          CNC-operation

-          Graphical presentation of work zones

-          Clear text error messaging

-          Schuler MDE Basic for machine data recording

Software Package for External PC:

-          WoodWOP for graphical, dialogue-oriented generation of CNC-programs

Stiles Link Rite:

      -     Stiles Link Rite takes the source files and split them to route information to different machining centers and horizontal or vertical boring equipment based on the tooling available on the machine.

Barcode Software (Barcode Control)

The barcode control is prepared for connection to a barcode reader of Datalogic.

Software to read a barcode via the serial interface. The software allows for the

following individual adaptation of the barcode information:

- Program name

- Place number

- Modus for two places at the same time, e.g. for alternating processing

The barcode can additionally include up to four variables (5-digit, in 1/10 mm). When using variables the new NC-program is automatically generated after scanning through the production list.

Further functions:

- Creating of production lists with help of the barcode, additionally a rated value can be passed on in the barcode.

- Connection of the barcode software to the project manager.  An imported project which includes the barcode for this part as an index can be processed with the barcodes irrespective of the sequence in the production list.

- Support and vacuum cup positioning can be displayed as a graphic or optional as a

laser projection.

Technical Specifications

Utility Requirements

Voltage supplied must not fluctuate in excess of /- 5 % of its stated value. Voltage must be balanced phase-to-phase and phase-to-ground.