Identificador: 1289
Abierta
Descripción
PARTE: 12259 - SIERRA ESCUADRADORA - PAULONI S-300
USADA - MUY BUENAS CONDICIONES
MFG. 2007
11 HP *8.5 KW) 220V, 3 FASES, 27.5 AMP
PESO: 430 KG
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO
PARTE:
12328 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO
USADO - BUENAS CONDICIONESFeatures gang rip and side
head capabilities. Additional technical specifications include... Planing & sawing width 24" maxThickness max. 4"Min. 1/2" Top Head: 4 knives 1/8" x 1-1/4" x 25"18 HP motorSpeed 5500 RPM5-1/4" cutting circle3/8" max chip removal7/8" profile depth max.8" dia. dust hood Bottom Head: 4 knives1/8" x 1-1/4" x 25"12 HP motor5500 RPM5-1/4" cutting circle3/8" max. chip removal...
AMXmachinery
ENCHAPADORA
PARTE # 11860 - ENCHAPADORA - CEHISA EP9220V, 3 Ph, 60 Hz, 23.5 AMPALIMENTA AUTOMATICAMENTE LA CINTACORTA AL PRINCIPIO Y AL FINALPERFILA AMBOS LADOS A LO LARGOPULE AMBOS LADOS
-500x500.jpg)
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...