Identificador: 2627 Abierta

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6

USADO – BUENAS CONDICIONES - RECONSTRUIDO

Max trim width 7.5"

Shear Cutting Action

Rotor Speed 500 to 3,600 rpm

1 HP motor

Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.

The open-rotor design facilitates free passage of air and material.

Shear-cut action for paper and tough, thin film and foil.

Total weight is 135 pounds

17"L x 13.25W x 22.5H

Pago y Devoluciones

Forma de pago: Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO

PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...

AMXmachinery

PARTE: 12612 – TRITURADORA – ASTILLADORA – 30 HP – HORIZONTAL – CRESSWOOD

PARTE: 12612 – TRITURADORA – ASTILLADORA – 30 HP – HORIZONTAL – CRESSWOODUSADA – BUENAS CONDICIONESModelo: EF-12-30SRSTCutterhead Motor: 30 HP, 230/460v, 3phFeed Motor: 0.75 HP, 230/460v, 3phVibrating Infeed Conveyor: 12" x 120"Variable Speed ControlAmp Meter for Cutterhead MotorYear: 20163/4” Screen, Currently

AMXmachinery

HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROS

PARTE: 2PG-SC2 - HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROSNUEVO CON GARANTIAIdeal for Teachers“I have traveled with my SC-2 for 11 years. I sometimes have to use welding gloves to put the warm kiln on a cart, take it outside, load it in the car, and wrap it in a wool blanket.“I have traveled out of state with my SC-2 repeatedly. Fired it over and over again in class, burned up all manner of skewers, toothpicks, cork clay and more. The kiln can take it! While I'm sure the kiln wou...