PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB
Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB
Paper, corrugated and heavy fiber board
USED - VERY GOOD CONDITIONS
BEST USES Removal of continuous film, Edge Trim and Matrix
INDUSTRIES Converting, Paper, Film, Plastic, Non-woven, Foils
IDEAL FOR
paper
light fiber board
corrugated board
solid bleached sulfate paperboard
plastic film
foil laminates
pressure-sensitive stock
light, non-ferrous foils
CAPABILITIES
Materials: Paper, corrugated and heavy fiber board
Trim Width max: 8 1/2" (216 mm)
Caliper Range:
3 mil to 250 mil
0.00300" to 0.25000"
0.0762 mm to 6.350 mm
Air Capacity: 3,000 cfm 5,100 m3/hr
Static Pressure Loss: 1.5" wg. @ 5,000 fpm air velocity
Drive: V-Belt or Direct Drive
Cutting Action: Impact
Rotor speed: 500 to 2,000 rpm
Weight: 355 lbs. (161kg) with motor
Dimensions
L x W x H: 225/8" x 181/2" x 283/4"
(574.7 mm x 469.9 mm x 730.3 mm)
FEATURES
• Rotor-mounted knife-adjustment screws for fast, easy setups
• Multiple knives: HCHC, NEOR, NEOR metal grind, carbide-edge
• Class "O" tapered roller bearings eliminate endplay and runout
• Rotor shaft supported by tapered roller bearings maintains rotor stability for long life
• V-belt, direct or gear-motor drive
• Open-rotor design facilitates passage of air and material
• Multiple mounting arrangements
• Flanged inlet, slip-fit outlet positions
• Multiple inlet positions
• 2 HP 3/60/460-volt TEFC motor is standard
• Motor 2 HP, RPM 2,000 max
STRAIGHT-CUT IMPACT ACTION, FROM PAPER TO FINE METAL FOIL
MAINTAINS CUTTING EDGE WITHOUT IN-PLACE CYLINDRICAL GRINDING
Top Performance
The 5TOB trim cutter offers proven BloApCo design with new, innovative maintenance and operating features to achieve higher performance and economy. Driven by a 2-hp electric motor, the 5TOB impact-cuts everything from paper to tough films to metal foil down to 3 mil thick. Varied knife profiles make short work of corrugated and heavy laminated trim up to 8-1⁄2" wide. A variety of wear-resistant HCHC, NEOR and carbide-edge knives can be arrayed to mate with slitting equipment and can reduce multiple ribbons of trim, depending on weight and thickness, for pneumatic conveying, baling, disposal or recycling.
Precise Operation
Cutting with one stationary bed knife and two rotating knives, the 5TOB makes two cuts per revolution at speeds from 500 to 2,000 rpm and passes 3,000 cfm of air at a static pressure loss of 1.5" wg at air velocities of 5,000 fpm. Rotor-mounted set screws make the knives individually and easily adjustable for maximum precision – and easy to remove for sharpening, with no need for “in-body” rotor grinding. Precision tapered roller bearings eliminate end play and runout problems, keeping clearances precise longer. Open rotor design allows fast, free flow of cut material through the cutter housing.
Easy Installation
Installation of a 5TOB trim cutter is quick and simple: The cutter is factory-tested, tailored to your application, and shipped completely assembled and ready to run.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Publicar mensaje
PATIN HIDRAULICO TODO TERRENO
PARTE: 1MM-001 - PATIN HIDRAULICO TODO TERRENO Nuevo con garantía Marca New Line todo terreno Capacidad maxima 1200 kg Estructura de acero de grueso calibr...
AMXmachinery
CONVERTIDORES DE FASES - DE 220V 2 FASES A 220V 3 FASES
PARTE: 2PH-GPPL - CONVERTIDORES DE FASES - DE 220V 2 FASES A 220V 3 FASES NUEVOS CON GARANTIA Rated for any environment, indoor/outdoor. Designed to work for ...
AMXmachinery
PARTE: 12482 - CEPILLO 1 CARA - CAPACIDAD 14” ANCHO - 5 HP, 3 FASES, 220V - MARCA JURADO
PARTE: 12482 - CEPILLO 1 CARA - CAPACIDAD 14” ANCHO - 5 HP, 3 FASES, 220V - MARCA JURADO USADO - BUENAS CONDICIONES
AMXmachinery
MARCADOR DE MADERA CON CALOR – MANUAL
PARTE: 2WB-2WK-CM-LM – MARCADOR DE MADERA CON CALOR – MANUAL NUEVO CON GARANTIA Ideal para compañías que quieren poner su marca privada en sus muebles y pr...
AMXmachinery