ID: 2285
Open
Description
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
USED - VERY GOOD CONDITION
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 1SIL-R-DRUSA-X86-100 – ROLLO DE LIJA 76 MM ANCHO X 45 METROS LARGO - PARA LIJADOTAS DE TAMBOR
PARTE # SIL-R-DRUSA-X86-100 – ROLLO DE LIJA 76 MM ANCHO X 45 METROS LARGOPARA LIJADORAS DE TAMBOR1 ROLLO GRANO 100 EN EXISTENCIA
2,700.00 MXN
AMXmachinery
ENCHAPADORA
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,- Total enclosure covers with dust hood connector.- Heavy and rigid construction to ensure necessary accuracy and stability.- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.- The top pr...
AMXmachinery
SECADOR DE AIRE - PARA AIRE COMPRIMIDO
PARTE: 12342 - SECADOR DE AIRE - PARA AIRE COMPRIMIDO
USADO - BUENAS CONDICIONES
Actualmente esta en servicioSpecifications:460V,
3 Phase. 60 HzLow
Side Circut Design Pressure: 1,9 Mpa, 19 Barg, 276PsigHigh
Side Circut Design Pressure: 2,8 Mps, 28 Barg, 406 PsigMaximum
Air Input: 60 Degrees C (Low), 140 Degrees (High)Minimum
Ambient Temperature: 5 Degrees C (Low), 41 Degrees F (High)Maximum
Ambient Temperature: 50 Degrees C (Low), 122 Degrees F (high)Minimum
Circuit Ampacity: 5.0 AM...
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 X 122 X 100 MM
PARTE: 12109 - CABEZAL PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 100 MM LARGOUSADOS – EN BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
4,900.00 MXN