Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PARTE # 12WG-UNIMAT 218 - MOLDURADORA - 6 CABEZALES
MOLDURADORA AUTOMATICA
6 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 7,5 (10) with Electronic Brake 6000 5“ – 7-7/8“
3 - 7,5 (10) with Electronic Brake 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 15 (20) with Electronic Brake 6000 5“ – 7-7/8“
6 - 7,5 (10) with Electronic Brake 6000 5“ – 8-7/8“
Tool arrangement BRLTTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“ (with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Six driven feed roller shafts from above
Two driven steel rollers in the machine table
Axial setting range of feed roller opposite the left tool holder 1 3/8”
Extension of the feed shaft opposite the left tool holders to 6”
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 -1/2"
Mechanical readouts on top spindle chip-breakers and pressure shoes.
Pressure shoe in front of left tool holder, incl. 2 lateral pressure rollers.
Receding chipbreaker in front of top spindles.
6 Additional set of spacing collars, clamping length 6-11/16”, diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles according to US regulations
Straightening table, 6-1/2 ft (incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
PARTE: 12461-3 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-3 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO USADO – MUY BUENAS CONDICIONES MARCA: DAYTON ELECTRIC MODELO: 3C503 Bas...
AMXmachinery
JUNTADORA DE CHAPA
PARTE # 11914 – JUNTADORA TRANSVERSAL DE CHAPA PRE-ENCOLADAFISHER RUCKLE FZL-34 DeltaLargo máximo de hoja de chapa 3400mmAncho máximo de cara de chapa 2900/3000mm (Es...
AMXmachinery
PARTE: 12455 - TROMPO - POWERMATIC
PARTE: 12455 - TROMPO - POWERMATIC USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 1SL-DC-WP15 - CEPILLO 1 CARA 15" ANCHO - MOTOR ARRIBA 3 HP, 2 FASES
PARTE: 1SL-DC-WP15 - CEPILLO 15" ANCHO - MOTOR 3 HP, 2 FASESNUEVO CON GARANTIAMOTOR: 3 HP, 220V, 60 Hz, MONOFASICOCAPACIDAD DE CORTE: 15" X 6"MAX. PROFUND...
AMXmachinery