Identificador: 1285
Abierta
Descripción
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
USADA – BUENAS CONDICIONES – LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle) pneumatic up/down
Central adjustment of top spindle chipbreaker and pressure shoe
Central adjustment of left spindle chipbreaker and left guide
DigiSet readouts for left and top spindle
One idle roller in the outfeed table
Motorized feed beam adjustment
Centralized lubrication
Manual waxilit pump
Electronic "Smart" spindle brakes
Set up stand
(5) 120 mm dust outlets
Electrical requirements: 62 amps @ 460 volt
NO tooling included
Mfg 2006
460V, 3 PH, 60 CY
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12501 – ARMADORA DE TARIMAS – BRONCO 2001R
PARTE: 12501 – ARMADORA DE TARIMAS – BRONCO 2001RUSADA - BUENAS CONDICIONES8'
rollout capable of holding 2 stacks
AMXmachinery
PARTE: 12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
PARTE:
12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
Usada - Buenas CondicionesMain motor: 25HP, 220V/440V*
(prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump -
Main Saw Motor - 25HPMaximum cutting capacity:
10" x 16"Distance from blade to
conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x
1" WSaw blade speed: 7300 FPMFloor to table height:
40"Infeed table: 106" L x
16" WInfeed belt: 2...
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
PARTE: 1SL-DC-WPM13 - CUCHILLAS PARA MOLDURAS - CEPILLO MOLDURADOR
PARTE: 1SL-DC-WPM13 - CUCHILLAS PARA MOLDURAS - CEPILLO MOLDURADOR Espesor 1/8”, ancho de 25mm y 35 mmPARTE #DESCRIPCIONDC-WPM13-1Clave 1 (longitud de corte 2-1/2”)DC-WPM13-2Clave 2 (longitud de corte 3” )DC-WPM13-3Clave 3 (longitud de corte 4-1/2”)DC-WPM13-4Clave 4 (longitud de corte 6”)