Description
PARTE # 3NN-CUTMATE3400D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 3400 MM
PARTE # 3NN-CUTMATE2800D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 2800 MM
Specification
Model | CutMate 3400D | CutMate 2800D |
Cutting Length | 3400 mm | 2800 mm |
Daylight Opening | 80 mm | 80 mm |
Electric Power | approx. 11 kw | approx. 11 kw |
Cutting Width | 30 ~ 470 mm | 30 ~ 470 mm |
Dimensions of Guillotine (L x W x H) | 5100 x 1800 x 2000 mm | 4500 x 1800 x 2000 mm |
Dimensions of Hydraulic Tank (L x W x H) | 1150 x 550 x 1100 mm | 1150 x 550 x 1100 mm |
Net Weight (with Hydraulic Tank) | approx. 8030 kg | approx. 7280 kg |
Color | RAL 8019 / RAL 9003 | RAL 8019 / RAL 9003 |
All double knife guillotines are constructed with a view to the highest security of the operator without causing any inconvenience to the working. All guillotines are completely hydraulic on both knives and pack beam with SAVI original technology and know-how. This double knife guillotine is particularly useful when cutting waving veneer bundles. The cutting accuracy is obtained by the fact that the whole veneer bundle is fully under pressure while cutting so that buckles in the veneers will be straightened out. The cutting movement is done on both sides of the veneer edges at the same time. The series with European superior quality of manufacturing guillotines offer the precise linear and parallel cutting. Coupled with Double Sided Veneer Glue Applicator (GlueMate 700) & Crossfeed Veneer Splicer (UltiMate series), the perfect gluing and jointing result is accomplished with high production efficiency.
Features
- parallel cutting guaranteed
- JAPAN YUKEN hydraulic system
- with European safety standards
- able to use the front knife individually
- JAPAN MITSUBISHI PLC control system
- rigid welded machine body for stable movement
- safety light barrier of knife and pack beam in front
- safety light barrier at the rear of the machine for safety concerns
- able to cut various materials including veneers, paper, plastic, etc.
- knives manufactured with high speed steel to extend the grinding life
- pack beam with two cylinders & four firm guides for long-time operation
- adjustable pressure with hydraulic knives and pack beam for all kinds of veneers
- hydraulic-driven rear fence for adjustment of the veneer pack to minimize the scrapes
CutMate D series
- simultaneously cutting with two knives for timesaving production cycle (short working cycle)
- "safety locker" at the front end of the knife beam (unique and only in INNOVATOR’s guillotines)
- extra safety valve of knife beam with additional safety knife protective cylinder to keep off any drop of knife
- special designed “emergency valve” for front knife to minimize operational danger caused by mechanical faults
- high speed movement of the firm working table by servo motor with three sets of linear guides and two sets of ballscrews
- optimizing program including manual cut mode, direct prog. mode, final width mode, etc. to cover all requirements of veneering work
- the user-friendly touch screen control panel with more than 50 sets of different veneer width at the same time in a direct program mode
CutMate D series Movements
A. The working table is moved forwards and backwards by a servo motor with three sets of linear guides and two sets of ballscrews.
B. The pack beam is moving up and down clamping the veneer bundle completely during the cutting process so
that the veneers are straightened out while cutting.
C. The front knife is mounted on the pack beam and cuts from the top against the working table.
D. The rear knife is mounted on the rear of the table and cuts upwards against the pack beam.
E. The rear fence is used for the adjustment of the veneer bundle when placing the veneers on the working table.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit
Post Message
PARTE: 2NV-KDK-42DS - SECANTE DE MADERA - CAPACIDAD 35,000 PIES TABLA
PARTE: 2NV-KDK-42DS - SECANTE DE MADERA - CAPACIDAD 35,000 PIES TABLAUna estufa propia puede reducir los costos de almacenamiento, producción, transporte y dar valor agr...
AMXmachinery
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 ...
AMXmachinery
GRABADORA LASER 48" X 36"
PARTE: 2TA-CLC4836 - GRABADORA LASER CNC 48" X 36"NUEVA CON GARANTIA47.2" X 35.4" GRABADORA/CORTADORA LASER- Applications for most material and many i...
AMXmachinery
FLEXOMETRO INDUSTRIAL
PARTE: 1SIL-DC-FI - FLEXOMETRO INDUSTRIALCon clip, gancho (cromado y templado) y cinta color blanca impresa doble caraCódigo Descripción ...
AMXmachinery