Identificador: 116
Abierta
Descripción
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFM
PARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFM
PARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFM
Nuevos con garantia
Caracteristicas:
Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.
This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste.
Electronic controls must be protected from weather.
See comparison chart below for specifications.
2EX-DCY-1215 | 2EX-DCY-1220 | 2EX-DCY-1425 | |
|---|---|---|---|
Horsepower | 15 HP | 20 HP | 25 HP |
Standard Leg Set | L1 | L2/L3 | L2/L3 |
CFM | 7600 | 8800 | 10500 |
Amps @ Voltage | 37A @ 230V | 49A @ 230V | 62A @ 230V |
Dimensions | 16'-3" x 73.25" x 73.25" | 23'-11" x 153.5" x 98.5" | 25'-1" x 153.5" x 98.5" |
Opening Dimensions | 74" x 69" x 72" | 164" x 149" x 91" | 164" x 149" x 91" |
Inlet Size | 14" | 16" | 18" |
Outlet Size | 16" | 18" | 20" |
Rotary Airlock HP | 1/4 HP | 1/4 HP | 1/4 HP |
Chip Dumping Capacity | 10 CFM | 10 CFM | 10 CFM |
Drop Size | 8" x 12" | 8" x 12" | 8" x 12" |
Soft Start | Yes | Yes | Yes |
Weight | 2000 lbs | 2500 lbs | 2850 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
PARTE: 12350 - LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
USADA - MUY BUENAS CONDICIONESLijadora marca COSTA modelo ACCC3 1350Útil de lijado 1350mmSubida bajada motorizadaIndicación digital altura mesaVariador de velocidad electrónico avance mesa1er grupo rodillo 90shores2on grupo rodillo 80shores3er grupo rodillo 70shoresSoplador en el 3er grupoExclusión neumática en los 3 gruposRegulación neumática 3er grupoNormativas CE
Maqu...
AMXmachinery
PUNZONADORA - HIDRAULICA - 40 TONS
PARTE: 12325 - PUNZONADORA - HIDRAULICA - 40
TONS
USADA - BUENAS CONDICIONES
Brand: Greenerd
Size: Length: 70 in.
Width: 44 in. Height: 96 in.
Country of
Manufacture: N/A
Weight (lbs, oz): 5934,
Tested and runs PLC
Lost its program
Safety's were
bypassed to test machine
Open height is
18-5/8"
Closed height is
6"
230/460V 3 Phase
Table Size
36"x16"
AMXmachinery
OPEN BACK ASSEMBLY TABLE
PART: 12033-E – OPEN BACK ASSEMBLY TABLE - 4 X 8 FEET - CASTLEUsed in Good Condition
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...