ID: 1935
Open
Description
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Payments & Returns
- Payment Methods
- Transferencia y Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
CUCHLLAS PARA BASTONERA HAWKER
PARTE: 1HA-0001 - JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKERNUEVASPARA BASTONERA MODELO HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.MEDIDAS NAVAJAS:4" LARGO X 2-3/16" ANCHO X 1/4" ESPESOR (100 MM LARGO X 55 MM ANCHO X 6 MM ESPESOR)
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50
PARTE: 12420 – SIERRA OPTIMIZADORA
– WEINIG DIMTER OPTICUT S50
USADA – MUY BUENAS CONDICIONESVoltage:
440/3/60Year:
2013
4" x 12" wide max. board capacity 14`
material capacity infeed & 8` outfeed table Loading bars attached to front
of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor,
197 FPM max. feed speed; Servo controlled pusher arm travels full length of
board, measures, positions and feeds board into saw; capable of single-piece
& pack...
AMXmachinery
SIERRA DE MESA 3 HP
PARTE # 2MK-SC.650.I – SIERRA DE BANCO – MOTOR 3 HP, 1 o 3 FASESNueva con garantiaMotor: 1 Phase, 3 Phase, 3 HPBlade Diameter: 250 (10″) mmTable Dimensions: 800 (20″) x 560 (27″) mmMax. Working Depth: 45°: 60 (2 3/8″) mm, 90°: 75 (2 15/16″) mmGross Weight: 197 kg (434 pounds)The Table Saw SCI MAKSIWA was designed to provide an excellent finish when cutting MDF panels and others materials, with easy adjustment and operation. With precise guides, the Table Saw SCI MAKSIWA is the ri...
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 X 122 X 60 MM
PARTE: 12108 – CABEZAL PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 60 MM LARGOUSADOS – EN BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
4,700.00 MXN