PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90 USADA – MUY BUENAS CONDICIONES Incoming Lengths up to 248" (20') Widths 3/4" Min to 14-1/4" Max Thickness 3/8" Min to 4" Max Automatic Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be Stored. Input up to 200 Lengths per Cutting List is Possible Saw Motor 10HP Saw Blade Diameter 20-1/2" Swiveling Positioning Pusher Including Laser Photo-eye for...

PARTE: AMX-10151 - SIERRA CINTA - VOLANTES 14” - ½ HP - DELTA USADA - MUY BUENAS CONDICIONES Gomas de los volantes nuevos Todos los baleros nuevosMotor 1/2 HP, 110V, 1 FaseVolantes 14" diametroMedidas totales: 33" ancho x 17" fondo x 66" alto

PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50 USADA – MUY BUENAS CONDICIONESVoltage: 440/3/60Year: 2013 4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack...

PARTE: 12423 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER USADA - BUENAS CONDICIONESModelo Eco DS0Año de fabricación 2000.Multicanal para cortar 4 tablas al mismo tiempoIncluye 1 marco de hoja de 500 mm y 1 para hojas de400 mm 480 Volts 60Hz

PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260 USADA – MUY BUENAS CONDICIONESYear of Manufacture: 2018Condition: ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working dimensions:Cross section min./max 0.48"- 10.23" width; .25" - 3.15" thickness. Min. part length 5.5" cut. Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...

PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD USADA – MUY BUENAS CONDICIONES3 HP TEFC Dual Voltage MotorsWired for 460 Volt, 3 PhaseStart and E-Stop buttonsLeft head fixed, Right head manually position via hand crankMinimum Cut Length @ 90 = 13”Maximum cut length @ 90 = 100”Both heads rotate inward 90 to 45 degreeBoth heads tilt outward to 45 degree for compoundTwo hand anti tie down cycle control on pedestalBuilt in 3rd party hydro-checkPne...

PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC USADA - BUENAS CONDICIONESFriulmac AutomaticCut Off MachineCutting Length 6.29" - 59.05"Working Width 1.18" - 5.51"Working Thickness 0.47" - 1.37"Four 4HP (3KW)Trim/Cut-off Motors 2 (2 each side)Saw Blade Diameter 150mm Max X 30mm boreDust Collection 4 X 120mm Outlets New in 2019Video: https://www.youtube.com/watch?v=b5BPcY82hjs

PARTE: 12405-15 - SIERRA TROZADORA DE BRAZO 2 HP USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-14 - SIERRA DE BANCO DE 3 HP DISCO DE DIAMETRO DE 12” USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-13 - SIERRA DE BANCO MOTOR 3 HP DISCO DE DIAMETRO DE 12" USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-12 - SIERRA CINTA DE 1 HP CON VOLANTE DE 50 CMS USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12411 - SIERRA MULTIPLE - DE VAIVEN - NEVA USADA - BUENAS CONDICIONES

PARTE: 12397 - SIERRA - RIP SAW - MATTISON USADA - BUENAS CONDICIONES Limpiada y Revisada Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-Crank Spindle Speed: 3,600 RPM

PARTE: 12392 – SIERRA OPTIMIZADORA – DIMTER WEINIG S90 USADA – MUY BUENAS CONDICIONES Incluye 2 empujadores para ClasificarYear of Manufacture: 2005Condition: GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0" LENGTHS.Working dimensions: Width 2" to 8"; thickness 3/8" to 2" and length 3' to 14-3/4" (4.5M).Motor: 10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed: Variable speed PUSH up to...

PARTE: 11884 – SIERRA DIMENSIONADORA - RAYCO UsadaMedidas de envío quitando las 2 mesas laterales: 490 cm largo x 120 cm ancho x 160 cm alto, 2000 kg

PARTE: 12385 - SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP USADA - BUENAS CONDICIONES54" Dia. Wheels with 6-1/2" Face7" x 29'0" blade SizeAir Tensioning with Dial Adj. for Top WheelSelf Centering Feed Works that can also be preset to a sizesix 7" Dia. x 12" High Smooth Feed Rolls (Three Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw Blade21" Max. Feed Roll Opening( 12" Outside Sawline, 9" Inside SawlineSteel Weldment Roll Cradle with Chrome Plate...

PARTE: AMX-10079 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 10” DIAMETRO - CTD D-45 USADA - MUY BUENAS CONDICIONES2 pistones pequenos a los lados que se activan antes de que las sierras bajen y suban, para que no se mueva el material a cortarCapacidad de corte con sierras de 10":  2-1/2" ancho x 3-1/4" alto También le quedan sierras de 12” para más capacidad de corteMade in USATwo (2) saws fixed at 45° angle (saw heads are adjustable up to 3°)(2) motors, 1.5 HP, 208-230/460V, ...

PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA USADA - BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to 95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...

PARTE: 12345-1 - SIERRA DE MESA - DISCO 10” - MOTOR 2 HP - PLEGABLE - DEWALTUSADA - BUENAS CONDICIONES

PARTE: 12345-1 - SIERRA DE MESA - DISCO 10” - MOTOR 3 HP - RIDGID USADA - BUENAS CONDICIONES