Showing results 1 to 5
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD USADA – MUY BUENAS CONDICIONES3 HP TEFC Dual Voltage MotorsWired for 460 Volt, 3 PhaseStart and E-Stop buttonsLeft head fixed, Right head manually position via hand crankMinimum Cut Length @ 90 = 13”Maximum cut length @ 90 = 100”Both heads rotate inward 90 to 45 degreeBoth heads tilt outward to 45 degree for compoundTwo hand anti tie down cycle control on pedestalBuilt in 3rd party hydro-checkPne...
AMXmachinery
SIERRA INGLETEADORA DOBLE – OMGA
PARTE: 12104 – SIERRA INGLETEADORA DOBLE – OMGAUsada – Buenas condicionesYear: 1998Condition: Good220/380V, 60HzMotor: 3 HP MotorsBlade: 14"Cut: 0-45 DegreesPneumatically Activated Heads
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...
AMXmachinery
2 SIERRAS INGLETERAS DOBLES - OMGA
PARTE: 12144 – 2 SIERRAS INGLETERAS DOBLES - OMGA USADAS – MUY BUENAS CONDICIONES - COMO NUEVAS YEAR 2005
AMXmachinery
SIERRA INGLETERA DOBLE – 10 PIES LARGO – WEGNOMA
PARTE: 12060-15 - SIERRA INGLETERA DOBLE – 10 PIES LARGO – WEGNOMAUSADA - EN BUENAS CONDICIONES