TALADRO MULTIPLE 21-HUSOS PARA CONSTRUCCION        2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  Has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle i...

TALADRO MULTIPLE HORIZONTAL                   2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience...

TALADRO MULTIPLE EN LINEA           2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The precision ...

PARTE: 2TA-A-2CWSERIES - CABEZAL PARA TALADROS - DISTANCIA AJUSTABLEMicro Adjustable.Maximum flexibility of drills distance application.Accurate center distance positioning.Heavy-duty construction requires minimum maintenance.Fast setup that helps reduce boring downtime. SpecificationsDimensionsABCDEFA-2CW130.39" (10 mm)0.39" (10 mm)1." (28 mm)2" (55 mm)4" (106.5 mm)2" (57 mm)A-2CW185" (127.5 mm)3" (67 mm)A-2CW195" (127.5 mm)3" (67 mm)A-2CW226" (143 mm)3" (82 mm)A-2CW258" (191 mm)4" (109 mm)...

PARTE: 2CK-BM-301FEATURES:Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.Come with adjustable two spindle drill head.Pneumatic work clamp to firmly hold workpieces.Machine operation activated by shrouded foot pedal.Cast iron work table with miter gauge for angled holes.Screw rise and fall adjustment of work table for varying timber thicknesses.Enclosed sheet steel floor stand supporting the machine. Table size 400 x 2...

PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  The HS21T has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle is equipped with a quick-change chuck t...

PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The precision boring head has interlocking steel ...

PARTE : 2JG-MAG-EVOLUTIONFLEX  -  CENTRO DE MAQUINADO - EVOLUTION FLEX CNCAccurately routes, drills, and grooves from underneath with automatic operator return or can be unloaded from the back.This machine is designed for one man operation and practically zero set-up timeIt is capable of routing, boring both vertically and horizontally, and for hinge holes, while also providing a grooving sawIt has an integrated control panel with an industrial PC using Windows Operating System, 17" color moni...

PARTE: 2JG-MAG-GT800  -  TALADRO MULTIPLE Y RANURADORA - GT800 CNCVery simple and fast programmingExtremely intuitive user interfaceImportable and text format exportable working programsUp to 1,000 programs can be storedMachines panels from aboveSuitable for drilling on face and sides of panels, including holes for dowels, hinges, KD Fittings and shelf holes(9) vertical spindles (6 in X axis and 4 in Y axis)Saw Blade Unit in X axis(2) 1 + 1 Horizontal Spindles in X axis(1) 1 + 1 Horizontal Sp...

PARTE: 2JG-MAG-SYSTEM46  -  TALADRO MULTIPLE - 46 DOBLE FILAProvides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm).Front end adjustment for quick and easy set-up.(2) 1.5 HP 2,800 RPM motors; max.Boring depth is 2-1/16" (55 mm).Side depth counter system; extractable 400 mm support rollers for long panels.Maximum distance between heads is 25-19/32" (650 mm) and minimum width is 5-1/8" (130 mm).Complete with: 46 quick cha...

PARTE: 2JG-MAG-SYSTEM35  -  TALADRO MULTIPLE - MAGGI SISTEMA 35Provides a 35 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angleAccurate positioning of the boring unit to the table with digital readout0 to 3.25" adjustable drilling depth with patented spiral setting device(4) patented quick release material clamps with auto-setting to firmly ho...

PARTE: 2JG-MAG-SYSTEM29  -  TALADRO MULTIPLE - SISTEMA 29Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(3) patented quick release material clamps with auto-setting to firmly hold ...

PARTE: EJG-MAG-SYSTEM23  -  TALADRO MULTIPLE - SISTEMA 23Provides a 23 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(2) patented quick release material clamps with auto-setting to firmly hold m...

PARTE: EJG-MAG-SYSTEM21  -  TALADRO MULTIPLE - SISTEMA 21Provides a 21 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle;Accurate positioning of the boring unit to the table with digital readout.3-Phase Option. Single Phase also available.0 to 2.5" adjustable drilling depth with patented spiral setting device.(2) patented quick release materi...

PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL Nueva con garantía 23-Spindle Drill Head Gear Driven Spindles on 32mm Centers Index Pins 3 HP Spindle Drive Motor, TEFC 10mm Bored Collets (12) Right Hand, (11) Left Hand 12″ Throat Depth 60″ Back Fence With (4) Stops 24″ X 48″ Work Table Surface (2) Spring Operated Hold Downs Wired 3-Phase 240/480 Volt, 60 Hz. Pneumatic Driven Boring Cycle Tooling Not In...

PARTE # RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL Nueva con garantía Fotos y Características: 3/4 HP Spindle Drive Motor, TEFC 60″ Back Fence Assembly (1) 13-Vertical Gear Driven Spindle Rows 10mm Bored Collets (7) Right Hand, (6) Left Hand (2) Index Pins 20″ X 48″ Work Table Surface Wired 1-Phase 120 Volt, 60 Hz. Manually Actuated Boring Cycle Tooling Not Included Crated Dimensions: 45″ X 80″ X 44″ and 508...

PARTE: 2MK-LBP13 – TALADRO MULTIPLE VERTICAL – 13 TALADROS - NEUMATICOProvide features that offer a longer life, such as the Lubricated Aluminum Head (versus a sheet metal head) and Heat treated Steel Gears (versus plastic gears). With a 1 HP motor (versus standard 3/4 HP in most models) and Stainless Steel Spindles (versus steel spindles), these boring machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!...

PARTE: 2MK-LBM13 – TALADRO MULTIPLE VERTICAL – 13 TALADROSProvide features that offer a longer life, such as the Lubricated Aluminum Head (versus a sheet metal head) and Heat treated Steel Gears (versus plastic gears). With a 1 HP motor (versus standard 3/4 HP in most models) and Stainless Steel Spindles (versus steel spindles), these boring machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!Specificatio...

PARTE # 2RT-R823 - TALADRO MULTIPLE - 23 TALADROSNUEVO CON GARANTIA23-Horizontal Gear Driven Spindles32mm Spindle Centers10 Mm Bored Collets(12) Right Hand, (11) Left Hand3,450 Spindle Rpm3 H.P. Spindle Drive Motor, TEFC0-2″ Adjustable Boring Depth20″ X 42″ Precision Ground TableBack Fence Lip(2) End Boring Fences(1) 5-Ton Carriage Adjusting Jack(4) 2.00″ Bore Clamping CylinderWired 3-Phase 480 Volt, 60 Hz.Foot Pedal Actuated Boring CycleNo Tooling IncludedDesigned And Manufactured In Th...

PARTE # 2TA-BR-52 – TALADRO MULTIPLE HORIZONTAL DE 1 LADO – 50” LARGONew with warrantySuitable and affordable for industrial and small workshop use.Capable of using "multiple drill head" for the drill distance less then 2".Easily adjust the drill position and add more drill spindles.Pneumatic clamp and drill head travel operated by foot pedal, hands free.Pneumatic and hydraulically stroke control for max. drilling power.Each spindle can be horizontally adjusted in position quickly.Cast iro...