PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high

PARTE # 2EV-0700 - SIERRA RADIAL - MANUAL - EVANS 0700Miter Saw, Manual Feed- 220 Volt, 3 Ph, 3 HP- Standard Features:- 16" Saw blade 1" arbor- Set up for 90, 45, and 22 ½ degree cuts- Pneumatically operated Saw Guard- Double V belt Drive on arbor.- Swing out supports for longer lengths- 60" X  96" working surface- 4" dust outlet on back of dust hood- 35 1/2 " working height. Adjustable leveling feet.- 50" stroke- Crated weight 1540 LBS. Shipping dimensions 104" long X 90" wide X 68" high

PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with variable speed control 35 1/2 " working height. Adjustable leveling feet. NEW: Additional guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...

PARTE # 2EV-4700 - PANEL CLEANER – EVANS 4700Powered In-Feed and Out-FeedFour 4" Dust PortsTwo 10” Nylon BrushesMaterial Thickness IndicatorEmergency Stop Buttons & Safety GateBase Work Height: 30”Brush Motor: 1 ½ HPDrive Motor: ½ HPElectrical: 230/460 V, 3 PH, 60 Hz 220 Volt 3 PhaseOptions:-       Riser Base

PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI

PARTE # EV-2470 - OVER ARM ROUTER - EVANS 2470- 110 Volt- Standard Features:- 3 HP router motor- 80 PSI Required- 21,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Lateral adjustment of pneumatic clamps.- Crated weight 1010 LBS. Shipping dimensions 69" depth X 72" wide X 85" high

PARTE # 2EV-5031 - LAMINATE SLITTER - EVANS 5031Laminate Slitter, 31" capacity- 110 Volt, 1 Ph., 1/3 HPStandard Features:- 31" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- 36” Working Height- Crated weight 865 LBS. Shipping dimensions 68” long X 54” wide X 49” highOptional:- 220 Volt 50 Hz (export)

PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010Laminate Slitter, 6" capacity- 110 Volt, 1 Ph., 1/3 HP,Standard Features:- 6" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” highOptional:- 220 Volt 50 Hz (export)

PARTE # EV-4270 - LAMINATE RACK - EVANS 4270 Pneumatic Laminate Rack- 100 PSI Required- Max 80 sheets 5’ X 12’ standard grade laminate.- Dual level storage area- Crated weight 1640 LBS. Shipping dimensions 81” long X 60” wide X 82” high

PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...

PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...

PARTE: 2EV-4253 - INDEX TABLE - EVANS 4253Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.Semi-automatic Index Table for PVA Panel LaminatingStandard Features:- Left to Right Feed- Automatic Board Drop- Adjustable Board Guides- Hand Crank Width Adjustment- Pneumatic Break to Lock Width- Custom Designed Conveyor Rollers- Max. Board Size: 62" W X 145" L- Min. Substrate Size: 9" W X 27" L- Max Board Thickness: 1.5"- Min Board Thickness: .375- In Feed Height: 43"- Out Feed H...

PARTE # 2EV-4243 - INDEX TABLE - EVANS 4243Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.Semi-automatic Index Table for PVA Panel Laminating- 80 PSI required- Standard Features:- Max. Board size, 62" X 145"- Min. Board size, 9" X 27"- In feed height 43”.- Out feed height 40”.- Open center for customer supplied scissors lift.- 18" extensions on in feed side.- Hand crank for width adjustment one revolution equals approx. 7".- Adjustable guides for board positioning.-...

PARTE # 2EV-0366 - INDEX TABLE - EVANS 0366Para fabricar cubiertas de cocina usando adhesivo de contacto- 80 PSI required- Standard Features:- Adjustments up to 61" wide- Adjustable alignment of laminate to core stock- Air pressure regulator. Pneumatically operated core positioning- Assembly required. Shipped KD- Crated weight 1000 LBS. Shipping dimensions 168” long X 25” wide X 24” highOptional:- Riser base to 37”

PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...