RESISTENCIAS DE REPUESTO EVANS MACHINERYPARTE # 2EV-01087 - RESISTENCIAS PARA POSTFORMADORAS

PARTE # EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...

PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection         Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....

PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI        - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...

PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features:                 - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...

PARTE: 2EV-0110 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110Maximum Post Forming Length : 12’Overhead Radiant Heater and DeflectorsPush Button Pneumatic ControlsSteel frame with adjustable leveling feet.35" working height. Dimensions 175” long, 26” wide, 60” highAdjustable Leaf Spacing Between ½” and 1 ½”Electrical: 240 V, 1 PH, 60 HzAir Requirement: 100 PSICrated weight 1500 LBS. Shipping dimensions 182” long X 30” wide X 64” highOptions: ¼” cove rod system (requi...

PARTE # 2EV-9100 - MESA DE VACIO - EVANS 9100Para Trabajos en los Cantos13” diameter suction cup with replaceable ringPneumatic multi-stage hi-flow vacuum pump with debris filterSolid tower and 5/16” thick baseFoot pedal for vacuum controls and rotation lockOptions:- Vacuum Stand WITHOUT Rotating (option 9050)- Upgrade to include stability ring for larger materials (option 9101)- Upgrade to add adjustable height (option 9151)- Upgrade to a 15” cup The 9101 Vacuum Stand features a high pow...

PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...

PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...

 PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high

PARTE # 2EV-0700 - SIERRA RADIAL - MANUAL - EVANS 0700Miter Saw, Manual Feed- 220 Volt, 3 Ph, 3 HP- Standard Features:- 16" Saw blade 1" arbor- Set up for 90, 45, and 22 ½ degree cuts- Pneumatically operated Saw Guard- Double V belt Drive on arbor.- Swing out supports for longer lengths- 60" X  96" working surface- 4" dust outlet on back of dust hood- 35 1/2 " working height. Adjustable leveling feet.- 50" stroke- Crated weight 1540 LBS. Shipping dimensions 104" long X 90" wide X 68" high

PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with variable speed control 35 1/2 " working height. Adjustable leveling feet. NEW: Additional guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...

PARTE # 2EV-4700 - PANEL CLEANER – EVANS 4700Powered In-Feed and Out-FeedFour 4" Dust PortsTwo 10” Nylon BrushesMaterial Thickness IndicatorEmergency Stop Buttons & Safety GateBase Work Height: 30”Brush Motor: 1 ½ HPDrive Motor: ½ HPElectrical: 230/460 V, 3 PH, 60 Hz 220 Volt 3 PhaseOptions:-       Riser Base

PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI

PARTE # EV-2470 - OVER ARM ROUTER - EVANS 2470- 110 Volt- Standard Features:- 3 HP router motor- 80 PSI Required- 21,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Lateral adjustment of pneumatic clamps.- Crated weight 1010 LBS. Shipping dimensions 69" depth X 72" wide X 85" high

PARTE # 2EV-5031 - LAMINATE SLITTER - EVANS 5031Laminate Slitter, 31" capacity- 110 Volt, 1 Ph., 1/3 HPStandard Features:- 31" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- 36” Working Height- Crated weight 865 LBS. Shipping dimensions 68” long X 54” wide X 49” highOptional:- 220 Volt 50 Hz (export)

PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010Laminate Slitter, 6" capacity- 110 Volt, 1 Ph., 1/3 HP,Standard Features:- 6" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” highOptional:- 220 Volt 50 Hz (export)

PARTE # EV-4270 - LAMINATE RACK - EVANS 4270 Pneumatic Laminate Rack- 100 PSI Required- Max 80 sheets 5’ X 12’ standard grade laminate.- Dual level storage area- Crated weight 1640 LBS. Shipping dimensions 81” long X 60” wide X 82” high

PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...

PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...