BOLSAS  PARA COLECTORES DE ASERRIN - TAMANOS ESPECIALESEnvienos las medidas, fotos y caracteristicas de las bolsas que necesita y cotizamos.

BOLSAS DE REPUESTO PARA COLECTORES DE ASERRIN COLECTOR 1 HP MEDIDAS BOLSA: 55 CMS DIAMETRO X 81 CM LARGO R-DC2041-BSF   BOLSA DE TELA SUPERIOR FUNCION DE FILTROR-DC2041-BID   BOLSA D TELA FUNCION DEPOSITO DE ASERRIN COLECTOR 2 HPR-DC2042-BSF   BOLSA DE TELA SUPERIOR FUNCION DE FILTROR-DC2042-BID   BOLSA D TELA FUNCION DEPOSITO DE ASERRIN COLECTOR 3 HPR-DC2043-BSF   BOLSA DE TELA SUPERIOR FUNCION DE FILTROR-DC2043-BID   BOLSA D TELA FUNCION DEPOSITO DE ASERRIN COLECTOR 5 HPR-DC2...

PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPAChapa Pre-Engomada requerida Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mm(solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)Veneer Strip Length：min. 200 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 30 m/min.Electric Power：approx. 5.9 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：800 mmDimensions (L x W x H)：1...

PARTE # 3NN-VENEERPLUSG2 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integrado Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.5 ~ 5.0 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：approx. 8 ~ 45 m/min. (depending on veneer strip thickness)Electric Power：approx. 10.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1500 mmDimensions (L x W x H)：2550 x 2100 x 1600 mmNe...

PARTE # 3NN-VENEERPLUSG1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integradoMachine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 45 m/min.Electric Power：approx. 8.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1200 mmDimensions (L x W x H)：2200 x 2100 x 1600 mmNet Weight：approx. 1500 kgColor：RAL 8019 / R...

PARTE # 3NN-CUTMATE3400D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 3400 MMPARTE # 3NN-CUTMATE2800D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 2800 MMSpecificationModelCutMate 3400DCutMate 2800DCutting Length3400 mm2800 mmDaylight Opening80 mm80 mmElectric Powerapprox. 11 kwapprox. 11 kwCutting Width30 ~ 470 mm30 ~ 470 mmDimensions of Guillotine (L x W x H)5100 x 1800 x 2000 mm4500 x 1800 x 2000 mmDimensions of Hydraulic Tank (L x W x H)1150 x 550 x 1100 mm1150 x 550 x 1100 mmNet Weight (with Hydr...

PARTE # 3NN-CUTMATE3200 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 3200 MMPARTE # 3NN-CUTMATE2800 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 2800 MMSpecificationsModelCutMate 3200CutMate 2800Cutting Length3200 mm2800 mmDaylight Opening120 mm120 mmElectric Powerapprox. 7.5 kwapprox. 7.5 kwCutting Width25 ~ 650 mm25 ~ 650 mmPack Beam Width150 mm150 mmDimensions (L x W x H)5000 x 1750 x 1850 mm4600 x 1750 x 1850 mmNet Weightapprox. 4800 kgapprox. 4450 kgColorRAL 8019 / RAL 9003RAL 8019 / RAL 9003 Than...

PARTE # 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE # 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1  strip)min. 75 mm (85 mm for 1  strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimension...

RODILLOS DE POLIURETANO PARA POSTFORMADORAS EVANS MACHINERYPARTE # 2EV-10707 - RODILLO DE SILICONPARTE # 2EV-10708 - RODILLO CORTOPARTE # 2EV-10709 - RODILLO LARGO

RESISTENCIAS DE REPUESTO EVANS MACHINERYPARTE # 2EV-01087 - RESISTENCIAS PARA POSTFORMADORAS

PARTE # EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...

PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection         Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....

PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI        - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...

PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features:                 - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...

PARTE: 2EV-0110 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110Maximum Post Forming Length : 12’Overhead Radiant Heater and DeflectorsPush Button Pneumatic ControlsSteel frame with adjustable leveling feet.35" working height. Dimensions 175” long, 26” wide, 60” highAdjustable Leaf Spacing Between ½” and 1 ½”Electrical: 240 V, 1 PH, 60 HzAir Requirement: 100 PSICrated weight 1500 LBS. Shipping dimensions 182” long X 30” wide X 64” highOptions: ¼” cove rod system (requi...

PARTE # 2EV-9100 - MESA DE VACIO - EVANS 9100Para Trabajos en los Cantos13” diameter suction cup with replaceable ringPneumatic multi-stage hi-flow vacuum pump with debris filterSolid tower and 5/16” thick baseFoot pedal for vacuum controls and rotation lockOptions:- Vacuum Stand WITHOUT Rotating (option 9050)- Upgrade to include stability ring for larger materials (option 9101)- Upgrade to add adjustable height (option 9151)- Upgrade to a 15” cup The 9101 Vacuum Stand features a high pow...

PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...

PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...

 PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high

PARTE # 2EV-0700 - SIERRA RADIAL - MANUAL - EVANS 0700Miter Saw, Manual Feed- 220 Volt, 3 Ph, 3 HP- Standard Features:- 16" Saw blade 1" arbor- Set up for 90, 45, and 22 ½ degree cuts- Pneumatically operated Saw Guard- Double V belt Drive on arbor.- Swing out supports for longer lengths- 60" X  96" working surface- 4" dust outlet on back of dust hood- 35 1/2 " working height. Adjustable leveling feet.- 50" stroke- Crated weight 1540 LBS. Shipping dimensions 104" long X 90" wide X 68" high