PARTE: 2CK-HR300PBX - REASERRADORA HORIZONTAL - 1 BANDA – CON REGRESADORA - 0°- 45° 30 HP – 12” ANCHO NUEVA CON GARANTIAIs industrially built for demanding applications.   The bed can be tilting from 0-45o making it ideal for bevel siding, moulding blanks, or millwork components.  Capable of feeding up to 12” x 12” timber and cutting up to 10” thick.  The powerful 30HP saw motor has a variable feed control allowing you to match the cutting speed to your blade & applicat...

PART: 2CK-HB-800-E - BAND RESAW - WITH FEEDER - 32” DIAMETER NEW WITH WARRANTYA 4” wide blade is driven by a powerful 20HP motor for precision straight resawing.  Equipped with a 1HP power variable speed feed unit which is pneumatically actuated to provide consistent feeding of the workpiece.  The feed speed can be variably adjusted from 3 to 56 FPM in accordance with the material type and thickness.Cast iron upper and lower saw wheels are precision machined and dynamically balancedPow...

PARTE: 2CK-HB-800 - REASERRADORA VERTICAL – CON ALIMENTADOR - VOLANTES 32” NUEVA CON GARANTIAA 4” wide blade is driven by a powerful 20HP motor for precision straight resawing.  Equipped with a 1HP power variable speed feed unit which is pneumatically actuated to provide consistent feeding of the workpiece.  The feed speed can be variably adjusted from 3 to 56 FPM in accordance with the material type and thickness.Cast iron upper and lower saw wheels are precision machined and dynami...

PARTE: 12530-E - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PARTE: 12530 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 4000 MM - EMME ELLE Usada - Muy buenas condiciones Modelo: T.O.2.4000 2 cuchillas, doble corte Largo máximo de trabajo 4000mm Hidráulica Panel de control frontal EC9001 Año 2002 Normas CE

PART: 12529-E - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PARTE: 12529 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 3200 MM - MONGUZZI Usada - Muy buenas condiciones Modelo TRM-2L 3200Capacidad 3200 MM Hidráulica Año 1995 Cuchillas afiladas Tapetes nuevos

PART: 12528-E - VERTICAL PANEL SAW - ELCON D215USED - GOOD CONDITION MFG. 2013

PARTE: 12528 - SIERRA VERTICAL - ELCON D215USADA - BUENAS CONDICIONESMFG. 2013

PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A USED - VERY GOOD CONDITIONYear: 2018CAPABILITIES-One-sided edgebander with glue pot-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port-Chain drive and upper presser-Group of pressure rollersWorkstation :-Premilling-Gluing unit with pellet pot-Adjustable pneumatic pressure unit-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, mot...

PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A USADA – MUY BUENAS CONDICIONESYear: 2018CAPABILITIES-One-sided edgebander with glue pot-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port-Chain drive and upper presser-Group of pressure rollersWorkstation :-Premilling-Gluing unit with pellet pot-Adjustable pneumatic pressure unit-End cutting unit 2 tilting saws 0-15˚ for bevel cutting...

PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232 USADO - MUY BUENAS CONDICIONESNumerically controlled machining centre ROVER GOLD 1232 Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis) Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm WORKING TABLE                 6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                 6 back stops of 115 mm stroke and 26 mm height spacers         �...

PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232 USADO - MUY BUENAS CONDICIONESNumerically controlled machining centre ROVER GOLD 1232 Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis) Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm WORKING TABLE                 6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                 6 back stops of 115 mm stroke and 26 mm height spacers         ...

PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm (129.1") Y - Axis: 1320mm (52") Z - Axis: 170mm (7") (6) ATS Panel Support Rails Biesse's ATS (auto locating pods) Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle (HSKF63) 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system (10) Vert. Spindles (7 in X & 3 in Y) (3) Horz...

PARTE: 12525 - CENTRO DE TRABAJO CNC - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm (129.1") Y - Axis: 1320mm (52") Z - Axis: 170mm (7") (6) ATS Panel Support Rails Biesse's ATS (auto locating pods) Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle (HSKF63) 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system (10) Vert. Spindles (7 in X & 3 in Y) (3) Hor...

PART: 2SC-2910-E - FEED TRACK ASSEMBLY - GANG RIP SAW - SCMI - M3 Guides included New with warranty

PARTE: 2SC-2910 - CADENA DE ALIMENTACION - SIERRA MULTIPLE SCMI - M3 Guías incluidas Nueva con Garantia

PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS: Diameter Range: 1/4" ~ 3/4"Motor: 1 HP, 1 PH, 115VWorking Speed: 24 ~ 28 FPMMinimum Working Mate...

PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...

PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...