PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM NUEVO CON GARANTIA• Fan 10 HP• 5,000 CFM• Total Static Pressure 8"wg• Filter Bags/Area qty/SF 24/371• Discharge 2 Bags• Variable Frequency Drive (VFD) at 10 hp and 460V• Add Pressure Transducer Kit Recommended with VFD• Vibratory Cleaning Device (VCD) with 460 V momentary starter, Aids in filter cleaning• Fan Inlet Adapter with 4" Branch and Manual Gate• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with F...

PARTE:  - ASTILLADOR DE MADERA - ASTILLAS REBABAS GRANDES - NEWMAN Usada - Buenas CondicionesMARCA: NEWMANMODELO: SS24 ALIMENTADOR VIBRATORIO

PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP USADO - MUY BUENAS CONDICIONES MOTOR 1 HP, 220/440V, 3 FASES, RPM 1750

PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM INTERNO - 15” DIAM EXTERNO - ½ HP USADO - MUY BUENAS CONDICIONES MOTOR ½ HP, 200/230/460V, 3 FASES, RPM 1140

PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP USADO - BUENAS CONDICIONES MOTOR 7.5 HP, 208-230/460V, 3 FASES, 3450 RPM, BALDOR ENTRADA REDONDA: 8.5” SALIDA RECTANGULAR: 4” X 8” MEDIDAS TOTALES: 23” ANCHO X 21” FONDO X 21” ALTO

PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP USADO - MUY BUENAS CONDICIONES MOTOR: 3 HP (2.2 KW), 220/460V, 3 FASES ENTRADA REDONDA: 10” SALIDA RECTANGULAR: 4” X 6” MEDIDAS TOTALES: 22” ANCHO X 17” FONDO X 25” ALTO

PARTE: AMX-10155 - EXTRACTOR DE TURBINA - 2 HP USADO - MUY BUENAS CONDICIONES MOTOR: 2 HP, 110/220V, 1 FASE, 3,450 RPM ENTRADA REDONDA: 5” SALIDA RECTANGULAR: 5” X 6” MEDIDAS TOTALES: 19” ANCHO X 18” FONDO X 18” ALTO

PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP - DAYTON USADO - MUY BUENAS CONDICIONES MODELO: 4C329 MOTOR: 1.5 HP, 208/230/460/380V, 3 FASES ENTRADA REDONDA: 7” SALIDA RECTANGULAR: 4” X 5” MEDIDAS TOTALES: 18” ANCHO X 16” FONDO X 20” ALTO

PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM INTERNO - 15” DIAM EXTERNO - ½ HP USADO - MUY BUENAS CONDICIONES MOTOR ½ HP, 200/230/460V, 3 FASES, RPM 1140

PARTE: AMX-10151 - SIERRA CINTA - VOLANTES 14” - ½ HP - DELTA USADA - MUY BUENAS CONDICIONES Gomas de los volantes nuevos Todos los baleros nuevosMotor 1/2 HP, 110V, 1 FaseVolantes 14" diametroMedidas totales: 33" ancho x 17" fondo x 66" alto

PARTE: 12436 - ENCHAPADORA DE CANTOS - SCMI USADA - BUENAS CONDICIONESGood Working Condition 230V, 3 PhaseYear: 2016 Top & Bottom TrimEnd TrimScrapeBuff

PARTE: 12435 - MOLDURADORA - 5 CABEZALES - WEINIG UNIMAT 300 USADA - BUENAS CONDICIONESGreat ConditionWell MaintainedShipping Dimensions: 10 ft x 7 ft x 6 ft Shipping Weight: 4,500 lbs approx.

PARTE: 12434 - MOLDURADORA - 6 CABEZALES - SCMI USADA - MUY BUENAS CONDICIONESMFG 2003 460/60/3 electrics

PARTE: 12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623USADA - BUENAS CONDICIONESVoltage: 550/3/60CSA Hydro approvedHead Sequence: Bottom, Right Side, Near Side, 1st Top, 2nd Top, 2nd Bottom9 1/16” x 6” CapacityInfeed Straightening Table -Sound EnclosureTotal H.P. 95.75 - Largest H.P. 20Total Amperage 107.2 40 mm Dia Spindles

PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50 USADA – MUY BUENAS CONDICIONESVoltage: 440/3/60Year: 2013 4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack...

PARTE: 12431 - PRENSA DE TABLEROS - 12 SECCIONES - DOUCET USADO – BUENAS CONDICIONESDOUCETModel SRH-12-8.5-96-44-R, 12 sectionIncluding: . 8½ ft. wide x 12 sections . 96 Clamps, 2½" x 44" opening (rapid change, N model)Hydraulic power unit, complete for rotation & tightening . Hydraulic tightening tool with joystick control and built-in torque control valve.One Hydraulic rotation motor and speed reducer with joystick forward/reverse control.Pneumatically actuated front gate and sect...

PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON USADO - MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw material 150-700 mm- min/max working thickness 20– 50 mm- min/max working width 35 - 170 mm- min/max final working length  2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife set- Volt. 400/50- year 2012- reconditioned by Weinig Service in 2022 - CE RULES

PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDADSaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorCore Selling Point: High-AccuracyBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessHydraulic Motor(kw): 0.09Blade Tension: HydraulicCoolant Motor (kw): 1.5Main Motor(kw): 5.5Max. Cutting Capacity(mm): Round:400mm, sqaure:400*710MMBlade Size(mm): 1.1*41*5720

PARTE: 3AM-H-330H - SIERRA CINTA PARA METAL - CONFIGURACION ALTASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualVice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMain Motor(kw): 4Coolant Motor (kw): 0.75Max. Cutting Capacity(mm): R...

PARTE: 3AM-H-33N - SIERRA CINTA PARA METAL - CNC AUTOMATICASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualVice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMain Motor(kw): 4Coolant Motor (kw): 0.75Max. Cutting Capacity(mm): Round:...