PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acry...

PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS: Diameter Range: 1/4" ~ 3/4"Motor: 1 HP, 1 PH, 115VWorking Speed: 24 ~ 28 FPMMinimum Working Mate...

PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...

PART: 2CA-RM70-E - ROUND POLE MILLING MACHINE - CAPACITY 3/8” - 2-3/8” DIAMETER NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, ...

PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...